We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Silver 1U rack server front panel with drive bays and status LEDs

HPE

HPE ProLiant DL360 Gen11 rack server dual Xeon 4410y 12-core 2.00 GHz 512GB DDR5 7.68TB SAS SSD

SKU CH-1AQW-X25ET

A compact 1U rack server with dual 12-core Xeon 4410y CPUs, 512 GB DDR5 ECC memory and 7.68 TB enterprise SAS SSD storage for virtualised workloads

  • TypeRack
  • CPU TypeIntel Xeon
  • MAX Processors2
  • Memory TypeDDR5
  • Max Memory Capacity512GB
  • Dual Xeon 4410y 12-core 2.00 GHz for virtualised workloads
  • 512 GB DDR5-4800 ECC memory scales database performance
  • 68 TB SAS SSD storage delivers ultra-fast data access
  • Redundant hot-swap power supplies keep applications running
  • iLO 6 remote management enables lights-out server control

Dual Xeon 1U rack server

The HPE ProLiant DL360 Gen11 is a 1U rack server built around two Intel Xeon Silver 4410y processors. Each CPU provides 12 cores at 2.00 GHz with a 30 MB cache and can reach 3.90 GHz under turbo. The system ships with 512 GB of DDR5-4800 ECC buffered memory across eight 64 GB modules. It is aimed at organisations running database applications and virtualised workloads that demand dense compute in a single rack unit.

Half-height PCIe Gen5 slots and hot-swap bays

The chassis offers half-height PCIe Gen5 expansion slots and four 2.5-inch hot-swappable drive bays. Storage is handled by an MR408i-o Gen11 controller with 4 GB cache and four 1.92 TB enterprise SAS SSDs delivering 7.68 TB total capacity. Dual redundant power supplies keep the platform running during a module swap. Remote management is provided by integrated iLO 6 with Intelligent Provisioning, and networking uses an embedded four-port 1 GbE OCP3 adapter. Memory and drives are supplied separately and require installation before deployment.

Sustained virtualised workloads with redundant power

Under continuous load the dual 12-core processors maintain elevated frequencies while the DDR5-4800 memory subsystem feeds data with ECC protection. The MR408i-o controller manages the SAS SSD array with its 4 GB cache to smooth write bursts during database commits and VM migrations. Redundant power supplies and hot-swap drive bays allow component replacement without downtime. iLO 6 provides out-of-band monitoring and firmware updates so administrators can maintain health remotely during extended production runs.

Highlights

  • Dual Xeon 4410y 12-core 2.00 GHz for virtualised workloads
  • 512 GB DDR5-4800 ECC memory scales database performance
  • 68 TB SAS SSD storage delivers ultra-fast data access
  • Redundant hot-swap power supplies keep applications running
  • iLO 6 remote management enables lights-out server control

Specifications

TypeRack
CPU TypeIntel Xeon
MAX Processors2
Memory TypeDDR5
Max Memory Capacity512GB

Questions about this item

How much DDR5 memory can the server support at maximum?

The system accepts up to 512GB of DDR5-4800MHz ECC buffered memory across its slots.

What cooling and noise level should I expect when the dual Xeon 4410y CPUs run continuously at full load?

Dual hot-swappable power supplies and the 1U chassis fans scale with CPU load; sustained turbo up to 3.90 GHz will raise fan speed and audible output accordingly.

Which storage controller and drive interfaces are already integrated so I know what cabling or backplane to prepare?

An MR408i-o Gen11 controller with 4GB cache connects to the four 2.5-inch SAS 12Gb/s SSD bays; the embedded OCP3 1GbE adapter handles network traffic.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.