HPE
HPE ProLiant DL380 Gen10 12LFF rack server 2x Xeon Silver 4210 1536GB DDR4
Dual 2.2 GHz Xeon Silver 4210 processors with 1.5 TB DDR4 in a 12-bay 3.5-inch rack chassis
- TypeRack
- CPU TypeIntel Xeon
- CPU Speed2.2GHz
- # of Processors Installed2
- MAX Processors2
- Installed Memory Size1.5TB
- Dual Xeon Silver 4210 processors provide 10 cores each at 2.2GHz
- 5TB DDR4 ECC registered memory supports demanding workloads
- 12 large-form-factor drive bays accept 3.5-inch SATA storage
- Smart Array P816i-a controller with 4GB cache manages RAID arrays
- Dual 800W hot-plug power supplies and Intel 10GbE plus 1GbE networking
- HPE iLO Advanced remote management enables lights-out administration
12-bay 3.5-inch LFF chassis
The HPE ProLiant DL380 Gen10 server arrives in a 12LFF rack-mount chassis that supports up to twelve 3.5-inch drives and occupies 2U of rack space. Two Intel Xeon Silver 4210 processors run at 2.2GHz with ten cores each and 13.75MB cache. Installed memory totals 1536GB of DDR4 ECC registered DIMMs. A Smart Array P816i-a SR Gen10 controller with 4GB cache manages the SATA drive bays.
Fits vertical-scaling workloads.
This dual-socket platform suits virtualisation hosts, in-memory databases or analytics clusters that need large memory capacity in a single node. The 1.5TB DDR4 configuration fills half the 3TB maximum, leaving room for future expansion without adding another server. Buyers who need distributed compute across many smaller nodes should evaluate multi-node racks instead.
Dual 800W hot-plug power supplies
Redundant 800W Flex Slot power supplies provide N+1 resilience and hot-swap replacement without downtime. The pair supports the fully populated 12-bay chassis, both CPUs and the full memory complement. Sites without redundant PDU feeds or rack-level UPS coverage must plan power distribution before deployment.
Highlights
- Dual Xeon Silver 4210 processors provide 10 cores each at 2.2GHz
- 5TB DDR4 ECC registered memory supports demanding workloads
- 12 large-form-factor drive bays accept 3.5-inch SATA storage
- Smart Array P816i-a controller with 4GB cache manages RAID arrays
- Dual 800W hot-plug power supplies and Intel 10GbE plus 1GbE networking
- HPE iLO Advanced remote management enables lights-out administration
Specifications
| Brand | HP |
|---|---|
| Series | ProLiant |
| Model | Rack Mount |
| Type | Rack |
| CPU Type | Intel Xeon |
| CPU Speed | 2.2GHz |
| # of Processors Installed | 2 |
| MAX Processors | 2 |
| Installed Memory Size | 1.5TB |
| Memory Type | DDR4 |
| Max Memory Capacity | 3TB |
| Hard Drive (Installed) | 6,00 |
| Storage Controller | HP Smart Array P816 Controller |
| HDD Interface | SATA |
| GPU Type | Integrated Graphics |
| Remote Management | HPE iLO Advanced |
| Dimensions | 36 x 24 x 10 in |
| Weight | 40 |
Questions about this item
How much heat and power do the two 2.2 GHz Xeon Silver 4210 CPUs and 1536 GB of DDR4 produce during continuous operation?
The dual 10-core Xeon Silver 4210 processors and 1.5 TB of DDR4 ECC memory are cooled by the chassis fans and powered by two 800 W hot-plug supplies; exact thermal output and draw depend on workload.
Which drives, caddies and cables must I supply to populate the 12 LFF 3.5-inch bays behind the Smart Array P816i-a controller?
You provide SATA hard drives or SSDs in 3.5-inch form factor; the server includes the P816i-a SR Gen10 4 GB RAID controller and backplane but no drive carriers or cables.
Will my existing SATA RAID arrays import cleanly onto the P816i-a SR Gen10 controller?
The P816i-a SR Gen10 supports standard SATA RAID levels and can recognise foreign configurations, so most legacy SATA volumes import without data loss after a controller rescan.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
HPE
HPE P22020B21 2U Cable Management Arm for DL38X Gen10 Plus Rail Kit
$52.99$67.99−22%
0.00067997BTC
In stock
Lenovo
Lenovo ThinkSystem ST250 V3 7DCEA01YNA Tower Server Xeon E-2434 16 GB RAM
$1,267.99
0.01627088BTC
In stock