HPE
HPE ProLiant DL380 Gen10 12LFF rack server 2x Xeon Silver 4210 2.2GHz 1TB DDR4
A 12-bay 3.5-inch rack server with dual 2.2 GHz Xeon Silver 4210 processors, 1 TB DDR4 memory and a Smart Array P816 controller, drives not included
- TypeRack
- CPU TypeIntel Xeon
- CPU Speed2.2GHz
- # of Processors Installed2
- MAX Processors2
- Installed Memory Size1TB
- 12 LFF drive bays support high-capacity 3.5 SATA storage
- Dual Xeon Silver 4210 CPUs deliver 10 cores each at 2.2GHz
- 1TB DDR4 ECC memory handles large workloads
- Smart Array P816i-a controller with 4GB cache manages RAID
- Dual 800W hot-plug supplies keep power redundant
Rack server with twelve 3.5" drive bays
The HPE ProLiant DL380 Gen10 12LFF is a dual-processor rack server built for data-intensive workloads. It ships with two Intel Xeon Silver 4210 processors running at 2.2GHz, each offering 10 cores and 13.75 MB cache. The system includes 1TB of DDR4 ECC registered memory and an HP Smart Array P816i-a SR Gen10 controller with 4GB cache. No drives are installed, allowing full storage customisation.
Suited for high-capacity storage builds
This chassis supports up to twelve 3.5-inch SATA drives, making it a fit for backup targets, media archives or software-defined storage clusters. Dual 800W hot-plug power supplies and integrated HPE iLO Advanced remote management simplify lights-out operations. Buyers who need pre-populated drives or a smaller form factor must look elsewhere.
Max memory capacity of 3TB
The platform supports up to 3TB of DDR4 across its DIMM slots, so the installed 1TB leaves headroom for future expansion. Memory must be DDR4 ECC registered; other generations or unbuffered modules are not compatible. Verify your application’s memory ceiling against this 3TB limit before ordering.
Highlights
- 12 LFF drive bays support high-capacity 3.5 SATA storage
- Dual Xeon Silver 4210 CPUs deliver 10 cores each at 2.2GHz
- 1TB DDR4 ECC memory handles large workloads
- Smart Array P816i-a controller with 4GB cache manages RAID
- Dual 800W hot-plug supplies keep power redundant
Specifications
| Brand | HP |
|---|---|
| Series | ProLiant |
| Model | Rack Mount |
| Type | Rack |
| CPU Type | Intel Xeon |
| CPU Speed | 2.2GHz |
| # of Processors Installed | 2 |
| MAX Processors | 2 |
| Installed Memory Size | 1TB |
| Memory Type | DDR4 |
| Max Memory Capacity | 3TB |
| Hard Drive (Installed) | 48,00 |
| Storage Controller | HP Smart Array P816 Controller |
| HDD Interface | SATA |
| GPU Type | Integrated Graphics |
| Remote Management | HPE iLO Advanced |
| Dimensions | 36 x 24 x 10 in |
| Weight | 40 |
Questions about this item
Will the 1TB DDR4 ECC Registered memory need replacement or expansion later?
The system supports up to 3TB of DDR4, so the installed 1TB can be expanded with additional modules if workloads grow.
What limit appears first when both Xeon Silver 4210 processors run at 2.2GHz under sustained load?
Thermal and power headroom from the dual 800W Flex Slot supplies will constrain continuous all-core performance before memory bandwidth does.
How much noise and heat do the dual 800W power supplies and fans produce during all-day operation?
Redundant 800W hot-plug supplies and variable-speed fans keep the 12LFF chassis within spec, but audible airflow is noticeable in quiet rooms.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



