HPE
HPE ProLiant DL380 Gen10 2x Xeon Bronze 3104 768GB DDR4 rack server
Rack-mount server with dual Xeon Bronze 3104 processors, 768 GB DDR4 memory, Smart Array P408 SAS controller and iLO Advanced remote management
- TypeRack
- CPU TypeIntel Xeon
- CPU Speed1.7GHz
- # of Processors Installed2
- MAX Processors2
- Installed Memory Size768GB
- Dual Xeon Bronze 3104 processors at 1.7GHz handle multi-threaded workloads
- 768GB DDR4 ECC registered memory supports large datasets and virtualisation
- HPE Smart Array P408 SAS controller manages up to eight 2.5-inch drive bays
- Integrated Intel I350 and X540 network adapters deliver two 10GbE and two 1GbE ports
- HPE iLO Advanced remote management enables out-of-band server control
ProLiant DL380 Gen10 with dual Xeon Bronze 3104
The HPE ProLiant DL380 Gen10 is a 2U rack server equipped with two Intel Xeon Bronze 3104 processors running at 1.7 GHz and 768 GB of DDR4 ECC registered memory. It includes an HPE Smart Array P408 SAS controller and dual 500 W Flex Slot power supplies. The chassis supports up to eight 2.5-inch drive bays and ships with firmware updated to the latest stable version.
Suited for memory-intensive workloads on a proven
This configuration suits organisations that need large memory capacity for virtualisation, in-memory databases or heavy multitasking within a standard rack footprint. The dual-socket design provides twelve total cores for parallel tasks. Buyers who need local storage must add SAS drives separately because no drives are installed. The Bronze 3104 lacks the higher core counts and cache of upper-tier Xeon models, so compute-bound applications may require a different processor choice.
Maximum memory capacity of 3 TB DDR4
The server can scale from the installed 768 GB up to 3 TB of DDR4 across its DIMM slots, allowing future growth without replacing the chassis. This ceiling is the key figure when planning long-term capacity for memory-heavy workloads.
Highlights
- Dual Xeon Bronze 3104 processors at 1.7GHz handle multi-threaded workloads
- 768GB DDR4 ECC registered memory supports large datasets and virtualisation
- HPE Smart Array P408 SAS controller manages up to eight 2.5-inch drive bays
- Integrated Intel I350 and X540 network adapters deliver two 10GbE and two 1GbE ports
- HPE iLO Advanced remote management enables out-of-band server control
Specifications
| Brand | HP |
|---|---|
| Series | ProLiant |
| Model | Rack Mount |
| Type | Rack |
| CPU Type | Intel Xeon |
| CPU Speed | 1.7GHz |
| # of Processors Installed | 2 |
| MAX Processors | 2 |
| Installed Memory Size | 768GB |
| Memory Type | DDR4 |
| Max Memory Capacity | 3TB |
| Hard Drive (Installed) | 1.200,00 |
| Storage Controller | HPE Smart Array P408 SAS Controller |
| HDD Interface | SAS |
| GPU Type | Integrated Graphics |
| Remote Management | HPE iLO Advanced |
| Dimensions | 36 x 24 x 10 in |
| Weight | 40 |
Questions about this item
What rack depth does the 36 x 24 x 10 in chassis require?
The chassis measures 36 inches deep, so the rack must provide at least that depth plus cable clearance at the rear.
Which step is often missed when seating the Smart Array P408 controller?
The controller must be fully pressed into the dedicated PCIe slot until the retention latch clicks; a partial seat causes the SAS drives to disappear at boot.
When should the two 500 W Flex Slot power supplies be replaced?
Replace a unit if its amber LED stays lit or iLO reports a power-supply fault; both modules are hot-pluggable so the server stays online during the swap.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
