HPE
HPE ProLiant DL380 Gen10 2x Xeon Bronze 3106 256GB DDR4 rack server
Dual Xeon Bronze 3106 1.7GHz CPUs with 256GB DDR4 ECC memory, Smart Array P408 controller, dual 10GbE and 1GbE networking, and two 500W supplies in a 2U rack chassis
- TypeRack
- CPU TypeIntel Xeon
- CPU Speed1.7GHz
- # of Processors Installed2
- MAX Processors2
- Installed Memory Size256GB
- Dual Xeon Bronze 3106 processors at 1.7GHz handle multi-threaded workloads
- 256GB DDR4 ECC registered memory supports large datasets and virtualisation
- Smart Array P408 SAS controller manages up to 8 drive bays for flexible storage
- HPE iLO Advanced remote management enables out-of-band server control
- 2U rack form factor fits standard 36 x 24 x 10 inch datacentre cabinets
Server System for Virtualisation Workloads
The HPE ProLiant DL380 Gen10 carries two Xeon Bronze 3106 processors at 1.7GHz and 256GB DDR4 ECC registered memory. A Smart Array P408 SAS controller manages up to eight 2.5-inch drive bays. Integrated graphics and iLO Advanced remote management handle headless operation in a 36 x 24 x 10 inch rack footprint.
Not Suited for GPU Compute or High-Frequency Tasks
Buyers who need dedicated GPU acceleration for AI training or rendering will find only integrated graphics here. Workloads that rely on high single-thread clock speeds or more than two processor sockets should look at a different platform.
Dual Xeon Bronze 3106 CPUs Define Capacity
Two 8-core Xeon Bronze 3106 processors set the thread count and memory ceiling at 3TB DDR4. This CPU pair is the fixed specification that determines whether the server fits your compute budget.
Highlights
- Dual Xeon Bronze 3106 processors at 1.7GHz handle multi-threaded workloads
- 256GB DDR4 ECC registered memory supports large datasets and virtualisation
- Smart Array P408 SAS controller manages up to 8 drive bays for flexible storage
- HPE iLO Advanced remote management enables out-of-band server control
- 2U rack form factor fits standard 36 x 24 x 10 inch datacentre cabinets
Specifications
| Brand | HP |
|---|---|
| Series | ProLiant |
| Model | Rack Mount |
| Type | Rack |
| CPU Type | Intel Xeon |
| CPU Speed | 1.7GHz |
| # of Processors Installed | 2 |
| MAX Processors | 2 |
| Installed Memory Size | 256GB |
| Memory Type | DDR4 |
| Max Memory Capacity | 3TB |
| Hard Drive (Installed) | 20,00 |
| Storage Controller | HPE Smart Array P408 SAS Controller |
| HDD Interface | SATA |
| GPU Type | Integrated Graphics |
| Remote Management | HPE iLO Advanced |
| Dimensions | 36 x 24 x 10 in |
| Weight | 40 |
Questions about this item
How do I install the HPE Smart Array P408 SAS Controller and what step is often missed?
Seat the controller firmly in the PCIe slot, connect the SAS cables to the backplane, then enable the controller in the BIOS before creating any logical drives — skipping the BIOS enable step leaves the drives invisible to the OS.
What maintenance will the 2x 500W Flex Slot power supplies need later?
Inspect the fan inlets for dust every few months; if a supply shows a persistent amber LED or fails the iLO health check, hot-swap the unit — no tools required.
What thermal limit appears first when both Xeon Bronze 3106 processors run at 1.7GHz under sustained load?
The chassis inlet temperature threshold triggers fan speed increases before the CPU package hits its maximum junction temperature, so keep the rack intake cool to avoid throttling.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
