HPE
HPE ProLiant DL380 Gen10 2x Xeon Silver 4108 384GB DDR4 rack server
Dual Xeon Silver 4108 1.8GHz 8-core CPUs with 384GB DDR4 ECC memory in a 2U rack chassis supporting 8 SFF drive bays
- TypeRack
- CPU TypeIntel Xeon
- CPU Speed1.8GHz
- # of Processors Installed2
- MAX Processors2
- Installed Memory Size384GB
- Dual Xeon Silver 4108 processors handle parallel workloads
- 384GB DDR4 memory supports large datasets and virtualization
- HPE Smart Array P408 controller manages SAS storage arrays
- HPE iLO Advanced enables remote server management
- 5-inch drive bays allow flexible storage configuration
ProLiant DL380 Gen10 dual Xeon server
The HPE ProLiant DL380 Gen10 is a 2U rack server fitted with two Intel Xeon Silver 4108 processors running at 1.8 GHz. It ships with 384 GB of DDR4 ECC registered memory and a Smart Array P408 SAS controller. The chassis supports up to eight 2.5-inch drive bays for flexible storage configuration.
Thermals noise and power
Dual 500 W Flex Slot power supplies provide redundancy for the dual-processor platform. The 36 by 24 by 10 inch form factor uses system fans that scale with CPU and memory load. Integrated graphics and the I350 or X540 network adapters add minimal heat during typical workloads.
Build quality and connectivity
A rail kit is available on request for standard rack mounting. The rear panel includes two 10 GbE and two 1 GbE ports from the Intel I350 or X540 card. HPE iLO Advanced enables remote console, power control and firmware updates without physical access. No drives are installed so buyers must add SAS storage to suit capacity or performance needs.
Highlights
- Dual Xeon Silver 4108 processors handle parallel workloads
- 384GB DDR4 memory supports large datasets and virtualization
- HPE Smart Array P408 controller manages SAS storage arrays
- HPE iLO Advanced enables remote server management
- 5-inch drive bays allow flexible storage configuration
Specifications
| Brand | HP |
|---|---|
| Series | ProLiant |
| Model | Rack Mount |
| Type | Rack |
| CPU Type | Intel Xeon |
| CPU Speed | 1.8GHz |
| # of Processors Installed | 2 |
| MAX Processors | 2 |
| Installed Memory Size | 384GB |
| Memory Type | DDR4 |
| Max Memory Capacity | 3TB |
| Hard Drive (Installed) | 9,60 |
| Storage Controller | HPE Smart Array P408 SAS Controller |
| HDD Interface | SAS |
| GPU Type | Integrated Graphics |
| Remote Management | HPE iLO Advanced |
| Dimensions | 36 x 24 x 10 in |
| Weight | 40 |
Questions about this item
How do I install the HPE Smart Array P408 SAS Controller and what step is often missed?
The P408 controller fits a PCIe slot inside the 380 chassis; the step often missed is connecting the SAS cables from the backplane to the controller ports before powering on.
Which components in this DL380 Gen10 will need replacement first under continuous operation?
The two 500W Flex Slot power supplies and system fans are the field-replaceable units most likely to require service after extended runtime.
What thermal or power limit appears first when both Xeon Silver 4108 CPUs run at 1.8GHz under sustained load?
The 500W power supply rating per module is the first constraint reached when both 8-core processors maintain full speed continuously.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



