HPE
HPE ProLiant DL380 Gen10 2x Xeon Silver 4208 512GB DDR4 rack server
2U rack server with dual Xeon Silver 4208 CPUs, 512 GB DDR4 ECC memory, P408 SAS controller and iLO remote management
- TypeRack
- CPU TypeIntel Xeon
- CPU Speed2.1GHz
- # of Processors Installed2
- MAX Processors2
- Installed Memory Size512GB
- Dual Xeon Silver 4208 processors provide 2.1GHz base frequency for multi-threaded workloads
- 512GB DDR4 ECC registered memory supports large datasets and virtualization
- HPE Smart Array P408 SAS controller enables flexible RAID configurations
- HPE iLO Advanced remote management allows out-of-band server control
- Supports up to 8 x 2.5in drive bays for scalable storage capacity
Dual Xeon Silver 4208 2.1 GHz server
The HPE ProLiant DL380 Gen10 is a 2U rack-mount server fitted with two Intel Xeon Silver 4208 processors running at 2.1 GHz. It ships with 512 GB of DDR4 ECC registered memory and an HPE Smart Array P408 SAS controller. The chassis supports up to eight 2.5-inch drive bays and includes dual 500 W power supplies plus integrated Intel I350 and X540 network adapters for 1 GbE and 10 GbE connectivity. Remote management is handled by HPE iLO Advanced.
Suits virtualisation hosts
This configuration targets environments that need high core counts and large memory capacity, such as virtualisation clusters, database servers or compute-intensive applications. The dual-socket design and 3 TB maximum memory ceiling provide headroom for growth. Organisations requiring pre-installed storage, GPU acceleration or a smaller form factor should evaluate other platforms.
512 GB DDR4 ECC registered memory installed
The server arrives with 512 GB of DDR4 ECC registered RAM populated across its DIMM slots, using the Xeon Silver 4208 memory controllers. This capacity is the decisive factor for workloads that must fit entirely in memory or require low-latency access to large datasets. Buyers needing a different memory size or speed must request a custom configuration before purchase.
Highlights
- Dual Xeon Silver 4208 processors provide 2.1GHz base frequency for multi-threaded workloads
- 512GB DDR4 ECC registered memory supports large datasets and virtualization
- HPE Smart Array P408 SAS controller enables flexible RAID configurations
- HPE iLO Advanced remote management allows out-of-band server control
- Supports up to 8 x 2.5in drive bays for scalable storage capacity
Specifications
| Brand | HP |
|---|---|
| Series | ProLiant |
| Model | Rack Mount |
| Type | Rack |
| CPU Type | Intel Xeon |
| CPU Speed | 2.1GHz |
| # of Processors Installed | 2 |
| MAX Processors | 2 |
| Installed Memory Size | 512GB |
| Memory Type | DDR4 |
| Max Memory Capacity | 3TB |
| Hard Drive (Installed) | 960,00 |
| Storage Controller | HPE Smart Array P408 SAS Controller |
| HDD Interface | SATA |
| GPU Type | Integrated Graphics |
| Remote Management | HPE iLO Advanced |
| Dimensions | 36 x 24 x 10 in |
| Weight | 40 |
Questions about this item
Will the Smart Array P408 controller work with my existing SATA drives?
The P408 SAS controller supports SATA drives, so your current SATA storage can connect directly to the controller without an adapter.
How do I verify the iLO Advanced remote management is active after installation?
Connect the dedicated iLO network port, then browse to its IP address; the iLO Advanced login screen and firmware version confirm the service is running.
Does the server ship with drive caddies or must I order them separately?
The chassis supports up to eight 2.5-inch bays; drive caddies are not included and must be purchased separately for each drive you install.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



