HPE
HPE ProLiant DL380 Gen10 8LFF 2x Xeon Silver 4210 64GB DDR4 No Drive Rack Server
Dual 2.2 GHz Xeon Silver 4210 processors, 64 GB DDR4, eight 3.5-inch bays with Smart Array P408 controller and iLO remote management
- TypeRack
- CPU TypeIntel Xeon
- CPU Speed2.2GHz
- # of Processors Installed2
- MAX Processors2
- Installed Memory Size64GB
- Dual Xeon Silver 4210 CPUs deliver 10 cores each at 2.2GHz
- 64GB DDR4 ECC registered memory supports demanding workloads
- HPE Smart Array P408 SAS controller manages up to eight 3.5in drive bays
- Intel I350/X540 network card provides 2x 10GbE and 2x 1GbE connectivity
- HPE iLO Advanced remote management enables full server control
Server Purpose
The HPE ProLiant DL380 Gen10 is a 2U rack server equipped with two Xeon Silver 4210 processors running at 2.2GHz, each providing 10 cores and 13.75 MB cache, plus 64GB of DDR4 ECC registered memory. It targets organisations that need a configurable 8-bay 3.5-inch chassis for virtualisation, database or file workloads. The unit ships with a Smart Array P408 SAS controller and dual 500W power supplies, while drives are ordered separately.
Fit and Gaps
This platform suits teams that want a tested, firmware-current server with integrated 10GbE and 1GbE networking and remote management through iLO Advanced. Buyers who require GPU compute acceleration or all-flash high-speed storage performance should evaluate alternative platforms. Organisations needing more than two sockets or memory beyond the 3TB ceiling will also need a different architecture.
Deciding Specification
The chassis provides eight 3.5-inch large-form-factor bays served by the Smart Array P408 SAS controller with SATA drive support, so the number and type of drives you populate directly determines total capacity and throughput.
Highlights
- Dual Xeon Silver 4210 CPUs deliver 10 cores each at 2.2GHz
- 64GB DDR4 ECC registered memory supports demanding workloads
- HPE Smart Array P408 SAS controller manages up to eight 3.5in drive bays
- Intel I350/X540 network card provides 2x 10GbE and 2x 1GbE connectivity
- HPE iLO Advanced remote management enables full server control
Specifications
| Brand | HP |
|---|---|
| Series | ProLiant |
| Model | Rack Mount |
| Type | Rack |
| CPU Type | Intel Xeon |
| CPU Speed | 2.2GHz |
| # of Processors Installed | 2 |
| MAX Processors | 2 |
| Installed Memory Size | 64GB |
| Memory Type | DDR4 |
| Max Memory Capacity | 3TB |
| Hard Drive (Installed) | 8,00 |
| Storage Controller | HPE Smart Array P408 SAS Controller |
| HDD Interface | SATA |
| GPU Type | Integrated Graphics |
| Remote Management | HPE iLO Advanced |
| Dimensions | 36 x 24 x 10 in |
| Weight | 40 |
Questions about this item
What drive bays and controller are needed to add storage to the 8LFF chassis?
The chassis provides eight 3.5-inch bays and includes an HPE Smart Array P408 SAS controller for SATA or SAS drives.
Will the installed Intel I350/X540 network card with two 10GbE and two 1GbE ports work with older 1GbE switches?
Yes, the 1GbE ports connect directly and the 10GbE ports auto-negotiate down to 1GbE on legacy switches.
How can I confirm the iLO Advanced remote management is active after power-on?
Watch the front panel for the iLO status LED to turn solid green, then browse to the displayed IP address and log in.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
