We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

HPE

HPE ProLiant DL380 Gen10 rack server 2x Xeon 6130 128GB DDR4

SKU CH-7Q8Q-5MR7K

Dual Xeon 6130 rack server with 128 GB DDR4, P408 SAS controller and 2.5-inch drive bays

  • TypeRack
  • CPU TypeIntel Xeon
  • CPU Speed2.1GHz
  • # of Processors Installed2
  • MAX Processors2
  • Installed Memory Size128GB
  • Dual Xeon 6130 processors provide 16 cores at 2.1GHz for demanding workloads
  • 128GB DDR4 ECC registered memory supports large datasets and virtualization
  • HPE Smart Array P408 SAS controller enables flexible RAID configurations
  • HPE iLO Advanced remote management allows full server control from anywhere
  • Supports up to 3TB DDR4 memory for future expansion

Dual-socket rack server for virtualisation

The HPE ProLiant DL380 Gen10 is a 2U rack-mount system fitted with two Intel Xeon 6130 processors running at 2.1GHz and 128GB of DDR4 ECC registered memory. It ships without storage drives, allowing the buyer to populate up to eight 2.5-inch bays with SAS media. The onboard Smart Array P408 controller and integrated graphics complete a platform aimed at consolidation workloads.

Buyers needing dense compute with flexible storage

This configuration suits organisations that want to choose their own drive mix and capacity for virtualisation, database or container hosts. It is not suitable for deployments that require pre-installed boot drives, GPU acceleration, or single-socket licensing optimisation.

128GB DDR4 installed, 3TB maximum

The system arrives with 128GB of DDR4 memory installed across the two processors and supports expansion up to 3TB when all DIMM slots are populated. This ceiling determines whether the chassis can accommodate the planned workload without a hardware change.

Highlights

  • Dual Xeon 6130 processors provide 16 cores at 2.1GHz for demanding workloads
  • 128GB DDR4 ECC registered memory supports large datasets and virtualization
  • HPE Smart Array P408 SAS controller enables flexible RAID configurations
  • HPE iLO Advanced remote management allows full server control from anywhere
  • Supports up to 3TB DDR4 memory for future expansion

Specifications

BrandHP
SeriesProLiant
ModelRack Mount
TypeRack
CPU TypeIntel Xeon
CPU Speed2.1GHz
# of Processors Installed2
MAX Processors2
Installed Memory Size128GB
Memory TypeDDR4
Max Memory Capacity3TB
Hard Drive (Installed)4,80
Storage ControllerHPE Smart Array P408 SAS Controller
HDD InterfaceSAS
GPU TypeIntegrated Graphics
Remote ManagementHPE iLO Advanced
Dimensions36 x 24 x 10 in
Weight40

Questions about this item

How do I install the 2x Xeon 6130 processors in the DL380 Gen10 and which step is most often missed?

Seat both processors in their sockets, apply the included thermal material evenly, then torque the heatsink retention screws in the diagonal sequence shown on the chassis label — skipping the sequence causes uneven pressure and boot failures.

What maintenance will the 128GB DDR4 memory and Smart Array P408 controller need later?

DDR4 ECC modules require no scheduled service; the P408 controller’s flash-backed write cache uses a super-capacitor that typically lasts several years and should be replaced when iLO reports a cache health alert.

What limit appears first when the dual 2.1GHz 16-core CPUs run sustained workloads in the 36 x 24 x 10 in chassis?

Thermal headroom is the first constraint; the 500W Flex Slot power supplies and system fans will throttle CPU frequency if inlet temperature or sustained power draw exceeds the platform’s cooling capacity.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.