HPE
HPE ProLiant DL380 Gen10 rack server 2x Xeon Gold 5120 768GB DDR4 no drive
Dual Xeon Gold 5120 14-core processors at 2.2 GHz with 768 GB DDR4 ECC memory, Smart Array P408 SAS controller, 10 GbE and 1 GbE networking.
- TypeRack
- CPU TypeIntel Xeon
- CPU Speed2.2GHz
- # of Processors Installed2
- MAX Processors2
- Installed Memory Size768GB
- Dual Xeon Gold 5120 processors at 2.2 GHz handle demanding workloads
- 768 GB DDR4 ECC memory supports large datasets and virtualisation
- Smart Array P408 SAS controller enables flexible RAID storage
- HPE iLO Advanced provides remote management and monitoring
- 5-inch drive bays allow custom storage configuration
Dual Xeon Gold 5120 server
The HPE ProLiant DL380 Gen10 is a 2U rack server equipped with two Intel Xeon Gold 5120 processors, each running at 2.2 GHz with 14 cores. It ships with 768 GB of DDR4 ECC registered memory and an HPE Smart Array P408 SAS controller. The chassis supports up to eight 2.5-inch drive bays, though no drives are included. Remote management is provided by HPE iLO Advanced.
Dual 500 W power supplies
Redundant 500 W Flex Slot power supplies feed the system, allowing continued operation if one unit fails. Integrated Intel I350 and X540 network adapters deliver two 10 GbE and two 1 GbE ports without add-in cards. The integrated graphics controller handles basic display output for console access. Firmware and BIOS are updated to the latest stable versions before shipment.
Sustained enterprise workloads
Burn-in testing verifies stability under continuous load across both CPUs and the full 768 GB memory population. The P408 controller manages RAID arrays for sustained storage throughput. This configuration suits virtualisation hosts, database nodes or compute clusters that need dual-socket density in a standard rack footprint. Buyers requiring internal storage must add drives separately.
Highlights
- Dual Xeon Gold 5120 processors at 2.2 GHz handle demanding workloads
- 768 GB DDR4 ECC memory supports large datasets and virtualisation
- Smart Array P408 SAS controller enables flexible RAID storage
- HPE iLO Advanced provides remote management and monitoring
- 5-inch drive bays allow custom storage configuration
Specifications
| Brand | HP |
|---|---|
| Series | ProLiant |
| Model | Rack Mount |
| Type | Rack |
| CPU Type | Intel Xeon |
| CPU Speed | 2.2GHz |
| # of Processors Installed | 2 |
| MAX Processors | 2 |
| Installed Memory Size | 768GB |
| Memory Type | DDR4 |
| Max Memory Capacity | 3TB |
| Hard Drive (Installed) | 7,68 |
| Storage Controller | HPE Smart Array P408 SAS Controller |
| HDD Interface | SATA |
| GPU Type | Integrated Graphics |
| Remote Management | HPE iLO Advanced |
| Dimensions | 36 x 24 x 10 in |
| Weight | 40 |
Questions about this item
How do I install the 2.5 inch drives into the eight drive bays and which step is often missed?
Slide each drive into a bay until the latch clicks, then create the logical volume in the Smart Array P408 controller BIOS before the operating system sees any storage.
What maintenance will the 768GB DDR4 memory and dual 500W power supplies need later?
Run the built-in memory test during each firmware cycle and replace a power supply only if the iLO alert shows a fault; both components are hot-pluggable.
What thermal limit appears first when both Xeon Gold 5120 processors run at 2.2GHz continuously?
The chassis fans will ramp to maximum speed once the CPU package temperature reaches the factory throttle point, capping sustained performance.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



