HPE
HPE ProLiant DL380 Gen10 rack server 2x Xeon Platinum 8260L 2.4GHz 24C 128GB DDR4 no drives
A 2U rack server with dual 24-core Xeon Platinum 8260L CPUs at 2.4GHz, 128GB DDR4 ECC memory, a Smart Array P408 SAS controller and no drives installed
- TypeRack
- CPU TypeIntel Xeon
- CPU Speed2.4GHz
- # of Processors Installed2
- MAX Processors2
- Installed Memory Size128GB
- Dual Xeon Platinum 8260L processors provide 24 cores each at 2.4GHz
- 128GB DDR4 ECC memory supports demanding workloads and virtualization
- HPE Smart Array P408 controller manages up to 8 SATA drives in 2.5-inch bays
- Integrated Intel I350 and X540 network adapters deliver 2x 10GbE and 2x 1GbE connectivity
- HPE iLO Advanced remote management enables full out-of-band server control
ProLiant DL380 Gen10 dual Xeon server
The HPE ProLiant DL380 Gen10 is a 2U rack-mount server system built for enterprise workloads. It ships with two Intel Xeon Platinum 8260L processors running at 2.4GHz and 128GB of DDR4 ECC registered memory. A Smart Array P408 SAS controller and integrated graphics are included, while drive bays remain empty for custom storage configuration.
Compute-heavy tasks with existing drive stock
This configuration suits buyers who need high core counts and large memory capacity but plan to supply their own 2.5-inch SATA or SAS drives. It is not for buyers who want a server with drives pre-installed, nor for deployments that require more than two processor sockets or memory beyond the 3TB maximum.
24 cores per processor at 2.4GHz
Each Xeon Platinum 8260L delivers 24 cores with 35.75MB cache at a base frequency of 2.4GHz. This core count and clock speed determine whether the server meets the throughput requirements of the target application.
Highlights
- Dual Xeon Platinum 8260L processors provide 24 cores each at 2.4GHz
- 128GB DDR4 ECC memory supports demanding workloads and virtualization
- HPE Smart Array P408 controller manages up to 8 SATA drives in 2.5-inch bays
- Integrated Intel I350 and X540 network adapters deliver 2x 10GbE and 2x 1GbE connectivity
- HPE iLO Advanced remote management enables full out-of-band server control
Specifications
| Brand | HP |
|---|---|
| Series | ProLiant |
| Model | Rack Mount |
| Type | Rack |
| CPU Type | Intel Xeon |
| CPU Speed | 2.4GHz |
| # of Processors Installed | 2 |
| MAX Processors | 2 |
| Installed Memory Size | 128GB |
| Memory Type | DDR4 |
| Max Memory Capacity | 3TB |
| Hard Drive (Installed) | 7,68 |
| Storage Controller | HPE Smart Array P408 SAS Controller |
| HDD Interface | SATA |
| GPU Type | Integrated Graphics |
| Remote Management | HPE iLO Advanced |
| Dimensions | 36 x 24 x 10 in |
| Weight | 40 |
Questions about this item
What rack depth does the 36 x 24 x 10 in chassis require?
The chassis measures 36 inches deep, so the rack must provide at least that much clear depth plus cable clearance behind the rear panel.
Which cables attach to the Smart Array P408 controller during installation, and what is the common mistake?
Connect the SAS cables from the backplane to the P408 ports; the frequent error is leaving a port unseated, which causes drives to disappear from the array.
When do the 500 W Flex Slot power supplies typically need replacement?
Replace a supply when its LED shows amber or iLO logs a power-supply failure; hot-swap the unit without powering down the server.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
