HPE
HPE ProLiant DL380 Gen11 2U Rack Server Dual Xeon 4410y 12-Core 2.00GHz 1TB DDR5 15.36TB SAS
2U rack server with dual 12-core Xeon 4410y CPUs, 1 TB DDR5 memory and 15.36 TB SAS SSD storage
- Dual Xeon Silver 4410y 12-core processors deliver 3.90 GHz turbo performance
- 1TB DDR5-4800 ECC memory across 16 modules supports large virtualised workloads
- 36TB enterprise SAS SSD storage in eight 1.92TB drives provides high-speed capacity
- MR408i-o Gen11 storage controller with 4GB cache accelerates RAID performance
- iLO 6 remote management with Intelligent Provisioning simplifies server administration
Dual Xeon 4410y 2U Server
The HPE ProLiant DL380 Gen11 is a 2U rack server built for virtualized workloads and hybrid environments. It ships with two Xeon Silver 4410y 12-core processors running at 2.00 GHz with up to 3.90 GHz turbo, 1 TB of DDR5-4800 ECC buffered memory across 16 modules, and 15.36 TB of enterprise SAS SSD storage across eight 1.92 TB drives. Windows Server 2022 Standard is included for immediate deployment.
Installation notes
Memory and storage are supplied separately and must be installed before use, so plan time for populating 16 DIMM slots and eight 2.5-inch drive bays. The server includes a rail kit for rack mounting and hot-swappable redundant power supplies that allow replacement without downtime. The MR408i-o storage controller manages the SAS array, and iLO 6 provides remote management for headless setup and monitoring.
Interface limits
The SAS 12 Gb/s interface caps sustained throughput for the eight SSDs, and the embedded four-port 1 GbE OCP3 adapter limits network bandwidth to gigabit speeds per port. PCIe Gen5 slots are available for adding higher-speed networking or storage controllers if the onboard interfaces become a bottleneck. The 16-core Windows Server license covers the installed processors but does not extend to additional sockets.
Highlights
- Dual Xeon Silver 4410y 12-core processors deliver 3.90 GHz turbo performance
- 1TB DDR5-4800 ECC memory across 16 modules supports large virtualised workloads
- 36TB enterprise SAS SSD storage in eight 1.92TB drives provides high-speed capacity
- MR408i-o Gen11 storage controller with 4GB cache accelerates RAID performance
- iLO 6 remote management with Intelligent Provisioning simplifies server administration
Specifications
No published specifications for this item yet.
Questions about this item
How can I confirm the server is running correctly after assembly?
Verify iLO 6 shows both Xeon Silver 4410y processors detected, all 16 memory modules at 4800MHz, eight 1.92TB SAS SSDs visible to the MR408i-o controller, and Windows Server 2022 Standard activating with the 16-core licence.
What components arrive in the box and what must I source separately?
The chassis, rail kit, dual redundant power supplies, embedded 4-port 1GbE OCP3 adapter, MR408i-o storage controller, iLO 6 module, Windows Server 2022 Standard licence, plus 16 memory modules and eight SSDs shipped uninstalled; no extra cables or rails are required.
Which memory configuration matches the 1TB DDR5 specification?
16 modules of 64GB DDR5-4800MHz ECC buffered memory fill the 1TB capacity exactly as supplied.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



