HPE
HPE ProLiant DL380 Gen11 2U rack server dual Xeon 5416s 16-core 2.00 GHz 1TB DDR5 30.72TB SATA SSD
2U rack server with dual Xeon 5416s 16-core 2.00 GHz processors, 1TB DDR5 memory and 30.72TB enterprise SATA SSD storage
- Dual Xeon Gold 5416s 16-core 2.00 GHz up to 4.00 GHz turbo
- 1TB DDR5-4800 ECC buffered memory across 16 x 64GB modules
- 72TB enterprise SATA SSD storage via 8 x 3.84TB 2.5" drives
- Redundant hot-swap power supplies keep the server online during replacement
- iLO 6 remote management with Intelligent Provisioning for simplified deployment
Dual Xeon 5416s server for virtualised workloads
The HPE ProLiant DL380 Gen11 is a 2U rack server built around two Xeon Gold 5416s processors. Each CPU provides 16 cores at 2.00 GHz with a 4.00 GHz turbo ceiling. The system ships with 1TB of DDR5-4800MHz ECC buffered memory and 30.72TB of enterprise SATA SSD capacity. It targets organisations running databases, virtualisation or multiple simultaneous applications in a hybrid environment.
SATA III 6Gb/s ceiling limits sequential throughput
The eight 3.84TB drives connect through a SATA III 6Gb/s interface, so sustained read and write speeds cannot exceed that bus limit. The MR408i-o storage controller adds 4GB cache and x8 lanes, but the underlying SATA protocol remains the bottleneck for heavy sequential workloads. Buyers who need more storage bandwidth should evaluate alternative interfaces.
1TB DDR5-4800MHz ECC memory defines capacity
The configured 1TB (16 x 64GB) of DDR5-4800MHz PC5-38400 ECC buffered memory sets the practical ceiling for virtual machine density and in-memory database sizing. Expansion beyond this amount would require additional DIMMs and available slots. Buyers who need more memory capacity must plan for further investment.
Highlights
- Dual Xeon Gold 5416s 16-core 2.00 GHz up to 4.00 GHz turbo
- 1TB DDR5-4800 ECC buffered memory across 16 x 64GB modules
- 72TB enterprise SATA SSD storage via 8 x 3.84TB 2.5" drives
- Redundant hot-swap power supplies keep the server online during replacement
- iLO 6 remote management with Intelligent Provisioning for simplified deployment
Specifications
No published specifications for this item yet.
Questions about this item
Should I pick the 1TB DDR5 kit or add more memory later?
The server arrives with 1TB installed as 16 modules of 64GB DDR5-4800, filling every slot; any increase means replacing modules rather than adding to empty bays.
What does the 2.00 GHz base clock deliver once the CPUs are under load?
Each Xeon Gold 5416s runs at 2.00 GHz base and can boost individual cores to 4.00 GHz, so sustained multi-threaded work stays near the base while burst tasks use the higher frequency.
How fast can the SATA III 6Gb/s interface actually move data with these SSDs?
The eight 3.84TB enterprise SATA SSDs connect through a 6Gb/s link, so sequential reads and writes are capped at the SATA III bus limit rather than the drive's internal maximum.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



