We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Silver 2U rack server with front drive bays and dual power supplies

HPE

HPE ProLiant DL380 Gen11 2U Rack Server Dual Xeon 5416s 1TB DDR5 15.36TB SATA SSD

SKU CH-P08S-BFZ1M

Dual 16-core Xeon 5416s server with 1TB DDR5-4800 and 15.36TB enterprise SATA SSD storage

  • Dual 16-core Xeon 5416s processors reach 4.00 GHz turbo for demanding workloads
  • 1 TB DDR5-4800 ECC memory across 16 modules supports large virtualised environments
  • 36 TB enterprise SATA SSD array provides high-capacity flash storage
  • Redundant hot-swap power supplies keep the server running during a module failure
  • Integrated iLO 6 remote management enables out-of-band control and provisioning

HPE ProLiant DL380 Gen11 2U Server

This HPE ProLiant DL380 Gen11 2U rack server bundles dual Xeon Gold 5416s 16-core processors running at 2.00 GHz with up to 4.00 GHz turbo. It ships with 1TB of DDR5-4800MHz ECC buffered memory across 16 modules and 15.36TB of enterprise SATA storage using eight 1.92TB 2.5-inch drives. Windows Server 2022 Standard is included with a 16-core license.

Suited for virtualized workloads

The dual-processor design with 30MB cache per CPU and PCIe Gen5 bandwidth supports diverse virtualized workloads and simultaneous applications. Hot-swappable redundant power supplies allow replacement without downtime. Buyers who need higher core counts per socket or faster storage interfaces should evaluate other configurations because this system uses SATA SSDs and an embedded 4-port 1GbE OCP3 adapter.

MR408i-o Gen11 storage controller with 4GB cache

The MR408i-o Gen11 x8 lanes storage controller provides 4GB cache and OCP SPDM support for RAID management of the eight SATA SSDs. Integrated iLO 6 Standard with Intelligent Provisioning handles remote management. Hard drives and memory upgrades are included separately and require installation before deployment.

Highlights

  • Dual 16-core Xeon 5416s processors reach 4.00 GHz turbo for demanding workloads
  • 1 TB DDR5-4800 ECC memory across 16 modules supports large virtualised environments
  • 36 TB enterprise SATA SSD array provides high-capacity flash storage
  • Redundant hot-swap power supplies keep the server running during a module failure
  • Integrated iLO 6 remote management enables out-of-band control and provisioning

Specifications

No published specifications for this item yet.

Questions about this item

How do I install the 16 memory modules and 8 drives that ship outside the chassis?

The server arrives with the 16 x 64GB DDR5 modules and 8 x 1.92TB SSDs packaged separately; you must open the 2U chassis, populate all 16 DIMM slots following the CPU-to-memory population guide, then seat each 2.5-inch drive into the front hot-plug bays before powering on.

Which components will need replacement first during the server's service life?

The hot-swap SSDs and the redundant power supplies are the primary field-replaceable units; SSDs wear with write cycles and power supplies can be swapped without downtime, while the DDR5 memory and Xeon processors are not designed for routine replacement.

What limits sustained throughput when the system runs flat out?

The SATA III 6Gb/s interface on the 8 enterprise SSDs caps maximum sequential transfer, and the MR408i-o controller's 4GB cache can only absorb bursts before write performance settles to the drives' native speed.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.