HPE
HPE ProLiant DL380 Gen9 4LFF 2x Xeon E5-2697 v4 256GB DDR4
Rack server with dual 18-core Xeon processors at 2.3GHz, 256GB DDR4 ECC memory, P440 SAS controller and four 3.5-inch drive bays
- TypeRack
- CPU TypeIntel Xeon
- CPU Speed2.3GHz
- # of Processors Installed2
- MAX Processors2
- Installed Memory Size256GB
- Dual 18-core Xeon processors at 2.3 GHz deliver high multi-threaded throughput
- 256 GB DDR4 ECC memory supports large virtualisation workloads
- Four 3.5-inch drive bays with P440 SAS controller enable flexible storage arrays
- HPE iLO Advanced remote management provides out-of-band server control
- Dual 500 W power supplies and 1 Gb 332T network adapter ensure resilient operation
Dual-socket Xeon server for virtualisation
This HPE ProLiant DL380 Gen9 chassis holds two Xeon E5-2697 v4 processors running at 2.3 GHz with eighteen cores each and 45 MB cache. The 256 GB of DDR4 ECC registered memory supports dense virtual-machine workloads or in-memory databases. Four 3.5-inch drive bays accept SATA or SAS media through the Smart Array P440 controller.
Rackmount chassis with redundant power and remote
The 2U rackmount frame measures 36 by 24 by 10 inches and weighs 40 pounds, sliding into standard cabinets with optional rail kits. Dual 500 W Flex Slot power supplies provide redundancy for continuous operation. HPE iLO Advanced gives full out-of-band control over network, power and firmware without visiting the data centre floor.
Replaces older dual-socket towers
Organisations consolidating multiple legacy hosts onto one platform gain core density and memory headroom in half the rack space. The jump is worth it when workloads exceed the thread count or RAM ceiling of single-processor servers and when integrated 1 GbE 332T networking meets current throughput needs.
Highlights
- Dual 18-core Xeon processors at 2.3 GHz deliver high multi-threaded throughput
- 256 GB DDR4 ECC memory supports large virtualisation workloads
- Four 3.5-inch drive bays with P440 SAS controller enable flexible storage arrays
- HPE iLO Advanced remote management provides out-of-band server control
- Dual 500 W power supplies and 1 Gb 332T network adapter ensure resilient operation
Specifications
| Brand | HP |
|---|---|
| Series | ProLiant |
| Model | Rack Mount |
| Type | Rack |
| CPU Type | Intel Xeon |
| CPU Speed | 2.3GHz |
| # of Processors Installed | 2 |
| MAX Processors | 2 |
| Installed Memory Size | 256GB |
| Memory Type | DDR4 |
| Max Memory Capacity | 3TB |
| Hard Drive (Installed) | 20,00 |
| Storage Controller | HPE Smart Array P440 SAS Controller |
| HDD Interface | SATA |
| GPU Type | Integrated Graphics |
| Remote Management | HPE iLO Advanced |
| Dimensions | 36 x 24 x 10 in |
| Weight | 40 |
Questions about this item
Which SAS controller is fitted, and what drive interface speed does it cap in practice?
The HPE Smart Array P440 SAS controller is installed; it manages the 3.5-inch drive bays over a SATA interface at the controller's native link rate.
What physical space and mounting hardware does the 4LFF chassis need?
The unit occupies 36 x 24 x 10 inches and fits a standard rack; the rail kit is available on request and must be fitted before sliding the server into place.
How is the server readied for first boot, and which step is commonly missed?
Power both 500W supplies, connect the management port for iLO access, then press the front power button; the step often missed is waiting for the iLO firmware to initialise before launching the remote console.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



