HPE
HPE ProLiant DL380 Gen9 4LFF rack server 2x Xeon E5-2650L v3 1.8GHz 12-core 256GB DDR4
A dual-processor 2U rack server with 24 cores at 1.8 GHz, 256 GB DDR4 ECC memory and four 3.5-inch drive bays ready for SAS or SATA storage
- TypeRack
- CPU TypeIntel Xeon
- CPU Speed1.8GHz
- # of Processors Installed2
- MAX Processors2
- Installed Memory Size256GB
- Dual 12-core Xeon processors at 1.8GHz deliver high parallel throughput
- 256GB DDR4 ECC registered memory supports large virtualised workloads
- HPE Smart Array P440 SAS controller enables flexible RAID arrays
- HPE iLO Advanced provides comprehensive remote server management
- 4LFF chassis accepts up to four 3.5-inch SATA drives
Server chassis and processors
The HPE ProLiant DL380 Gen9 4LFF rack server ships with two Xeon E5-2650L v3 processors running at 1.8GHz, each providing 12 cores for a total of 24 threads. It targets organisations that need a dense 2U platform for virtualization, database or legacy workloads where high core counts and large memory capacity matter more than single-thread speed.
Thermals and power in normal use
Dual 500W Flex Slot power supplies deliver redundant power while the chassis fans adjust speed based on inlet temperature and component load. Under typical mixed workloads the system maintains safe thermal margins without reaching maximum fan RPM, keeping acoustic output suitable for a standard server room environment.
Included controller and management
The onboard P440 SAS controller supports RAID 0, 1, 5, 6, 10, 50 and 60 across up to four 3.5-inch SATA drive bays, and the integrated iLO Advanced remote management enables full out-of-band control, firmware updates and health monitoring without an operating system.
Highlights
- Dual 12-core Xeon processors at 1.8GHz deliver high parallel throughput
- 256GB DDR4 ECC registered memory supports large virtualised workloads
- HPE Smart Array P440 SAS controller enables flexible RAID arrays
- HPE iLO Advanced provides comprehensive remote server management
- 4LFF chassis accepts up to four 3.5-inch SATA drives
Specifications
| Brand | HP |
|---|---|
| Series | ProLiant |
| Model | Rack Mount |
| Type | Rack |
| CPU Type | Intel Xeon |
| CPU Speed | 1.8GHz |
| # of Processors Installed | 2 |
| MAX Processors | 2 |
| Installed Memory Size | 256GB |
| Memory Type | DDR4 |
| Max Memory Capacity | 3TB |
| Hard Drive (Installed) | 16,00 |
| Storage Controller | HPE Smart Array P440 SAS Controller |
| HDD Interface | SATA |
| GPU Type | Integrated Graphics |
| Remote Management | HPE iLO Advanced |
| Dimensions | 36 x 24 x 10 in |
| Weight | 40 |
Questions about this item
How do I install the 3.5 inch drives into the four LFF bays and what step is often missed?
Slide each drive into a bay until the latch clicks, then verify the P440 SAS controller detects every drive in the BIOS before creating arrays.
Which components will need replacement first during long-term operation?
The two 500W Flex Slot power supplies and system fans are the primary field-replaceable units that wear out before the Xeon processors or DDR4 memory.
What thermal or power limit appears first when both 12-core CPUs run at 1.8GHz continuously?
The dual 500W power supplies set the ceiling; sustained full load on all 24 cores can trip their over-current protection before the CPUs throttle.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
