HPE
HPE ProLiant DL380 Gen9 8SFF 1x Xeon E5-2650v4 192GB DDR4
Rack server with 192 GB DDR4 memory, 12-core Xeon at 2.2 GHz and eight 2.5-inch drive bays
- TypeRack
- CPU TypeIntel Xeon
- CPU Speed2.2GHz
- # of Processors Installed1
- MAX Processors2
- Installed Memory Size192GB
- 12-core Xeon handles heavy workloads
- 192 GB DDR4 ECC memory supports large datasets
- Eight 2.5-inch drive bays allow flexible storage
- P440 SAS controller manages RAID arrays
- Dual 10 GbE plus dual 1 GbE network ports deliver high throughput
HPE DL380 Gen9 8SFF Server
The HPE ProLiant DL380 Gen9 arrives in an 8SFF chassis that holds up to eight 2.5 inch drives. One Xeon E5-2650v4 running at 2.2GHz with 12 cores and 30MB cache powers the system. Memory is populated to 192GB of DDR4 ECC registered RAM. A Smart Array P440 SAS controller manages storage, while dual 500W flex-slot supplies deliver redundant power.
Suits virtualisation hosts needing dense memory
This configuration fits teams running hypervisors or database workloads that benefit from the installed 192GB DDR4 and the eight front bays. The single processor leaves a second socket open for future growth. Buyers who require more than two CPUs, GPU compute, or a different drive count should evaluate other platforms.
Single-socket Xeon E5-2650v4 with 192GB DDR4
The decisive specification is the single Xeon E5-2650v4 paired with 192GB of DDR4 memory. This combination sets the baseline compute and memory capacity before any upgrades. If the workload demands two processors from day one or a larger initial memory footprint, this unit will not meet that need without changes.
Highlights
- 12-core Xeon handles heavy workloads
- 192 GB DDR4 ECC memory supports large datasets
- Eight 2.5-inch drive bays allow flexible storage
- P440 SAS controller manages RAID arrays
- Dual 10 GbE plus dual 1 GbE network ports deliver high throughput
Specifications
| Brand | HP |
|---|---|
| Series | ProLiant |
| Model | Rack Mount |
| Type | Rack |
| CPU Type | Intel Xeon |
| CPU Speed | 2.2GHz |
| # of Processors Installed | 1 |
| MAX Processors | 2 |
| Installed Memory Size | 192GB |
| Memory Type | DDR4 |
| Max Memory Capacity | 3TB |
| Hard Drive (Installed) | 7,68 |
| Storage Controller | HPE Smart Array P440 SAS Controller |
| HDD Interface | SATA |
| GPU Type | Integrated Graphics |
| Remote Management | HPE iLO Advanced |
| Dimensions | 36 x 24 x 10 in |
| Weight | 40 |
Questions about this item
How do I install the Xeon E5-2650v4 processor and what step is often missed?
Align the processor notches with the socket keys, lower it straight down, close the retention lever fully, then apply thermal paste before seating the heatsink — skipping the paste causes overheating.
What maintenance will the 192GB DDR4 memory and P440 controller need later?
DDR4 ECC registered modules rarely fail; reseat them only if iLO reports correctable errors. The P440 cache module battery should be replaced every three to five years to preserve write-back performance.
What limit appears first when the dual 500W power supplies run sustained loads?
Each 500W supply delivers up to 500 watts; combined sustained draw above 500 watts leaves no redundancy, so the first limit is losing N+1 protection rather than total capacity.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
