HPE
HPE ProLiant DL380 Gen9 8SFF 1x Xeon E5-2697 v4 192GB DDR4 No Drive rack server
Rack server with one 2.3 GHz Xeon processor, 192 GB DDR4 memory and eight 2.5-inch drive bays ready for SAS or SATA storage
- TypeRack
- CPU TypeIntel Xeon
- CPU Speed2.3GHz
- # of Processors Installed1
- MAX Processors2
- Installed Memory Size192GB
- 18-core Xeon E5-2697 v4 at 2.3 GHz delivers high compute density
- 192 GB DDR4 ECC memory supports large virtualisation workloads
- Eight 2.5-inch drive bays with P440 SAS controller enable flexible storage arrays
- Dual 10 GbE plus dual 1 GbE ports provide high-throughput networking
- Redundant 500 W power supplies and iLO remote management ensure uptime
HPE DL380 Gen9 8SFF single-socket server
The HPE ProLiant DL380 Gen9 arrives in an 8SFF chassis with one Intel Xeon E5-2697 v4 processor running at 2.3GHz and 18 cores. It includes 192GB of DDR4 ECC registered memory and a Smart Array P440 SAS controller. The unit ships without drives so you can populate the 2.5-inch bays with SATA or SAS media that match your workload.
Rack-mount installation and common pitfalls
The 2U rack form factor slides into standard 19-inch cabinets using optional rail kits. Two 500W flex-slot power supplies are pre-installed for redundancy. Verify that your rack depth accommodates the 36-inch chassis length and that the 40-pound weight is within the rack’s load rating. Drive caddies for the eight front bays are not included and must be sourced separately.
Sustained-load behaviour with dual 10GbE networking
Under continuous load the dual 500W supplies share current evenly while the integrated Intel I350 and X540 adapters provide two 10GbE and two 1GbE ports for steady throughput. iLO Advanced remote management stays responsive during long compute runs because it operates on a dedicated subsystem. The second CPU socket remains empty for future expansion up to 3TB of DDR4 memory.
Highlights
- 18-core Xeon E5-2697 v4 at 2.3 GHz delivers high compute density
- 192 GB DDR4 ECC memory supports large virtualisation workloads
- Eight 2.5-inch drive bays with P440 SAS controller enable flexible storage arrays
- Dual 10 GbE plus dual 1 GbE ports provide high-throughput networking
- Redundant 500 W power supplies and iLO remote management ensure uptime
Specifications
| Brand | HP |
|---|---|
| Series | ProLiant |
| Model | Rack Mount |
| Type | Rack |
| CPU Type | Intel Xeon |
| CPU Speed | 2.3GHz |
| # of Processors Installed | 1 |
| MAX Processors | 2 |
| Installed Memory Size | 192GB |
| Memory Type | DDR4 |
| Max Memory Capacity | 3TB |
| Hard Drive (Installed) | 4,00 |
| Storage Controller | HPE Smart Array P440 SAS Controller |
| HDD Interface | SATA |
| GPU Type | Integrated Graphics |
| Remote Management | HPE iLO Advanced |
| Dimensions | 36 x 24 x 10 in |
| Weight | 40 |
Questions about this item
How do I confirm the iLO Advanced remote management is responding after first power-on?
Connect a network cable to the dedicated iLO port, open a browser to the displayed IP address, and log in with the default credentials shown on the pull-out tag to reach the iLO Advanced dashboard.
What components are included in the box and what must be purchased separately?
The chassis ships with one Xeon E5-2697 v4 processor, 192 GB DDR4 ECC memory, a P440 SAS controller, dual 500 W power supplies, and a quad-port Intel 10 GbE / 1 GbE network card; 2.5-inch drives and rail kit are not included.
Should I choose the single-processor 192 GB configuration or add a second CPU to reach the 3 TB memory ceiling?
The board supports two processors and 3 TB maximum memory; adding the second Xeon unlocks the extra DIMM slots required to grow beyond the installed 192 GB.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
HPE
HPE P22020B21 2U Cable Management Arm for DL38X Gen10 Plus Rail Kit
$52.99$67.99−22%
0.00067503BTC
In stock
Lenovo
Lenovo ThinkSystem ST250 V3 7DCEA01YNA Tower Server Xeon E-2434 16 GB RAM
$1,267.99
0.01615274BTC
In stock