We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

HPE

HPE ProLiant DL380 Gen9 8SFF 2× Xeon E5-2687W v3 256GB DDR4

SKU CH-BEJ4-EMPJ0

A 2U rack server with two 3.1 GHz 10-core Xeon processors, 256 GB DDR4 memory, a P440 SAS RAID controller and eight 2.5-inch drive bays

  • TypeRack
  • CPU TypeIntel Xeon
  • CPU Speed3.1 GHz
  • # of Processors Installed2
  • MAX Processors2
  • Installed Memory Size256GB
  • Dual 10-core Xeon processors at 3.1 GHz for demanding workloads
  • 256 GB DDR4 ECC memory supporting large datasets and virtualization
  • Eight 2.5-inch drive bays with P440 SAS controller for flexible storage
  • Integrated iLO Advanced remote management for lights-out administration
  • Redundant 500 W power supplies maintaining uptime during maintenance

Dual Xeon 10-core 3.1 GHz server

The HPE ProLiant DL380 Gen9 is a 2U rack-mount server system equipped with two Intel Xeon E5-2687W v3 processors, each running at 3.1 GHz with ten cores. It ships with 256 GB of DDR4 ECC registered memory and an HPE Smart Array P440 SAS RAID controller. The 8SFF chassis supports up to eight 2.5-inch SAS drives, which are not included. Integrated graphics and HPE iLO Advanced remote management are standard.

Suits compute-heavy workloads.

This configuration targets virtualization hosts, database nodes and high-frequency compute tasks that benefit from high core clocks and large memory capacity. The dual 10-core CPUs deliver strong single-thread performance for licensed software tied to core counts. Buyers who need more storage bays than the eight 2.5-inch slots provide, or who require GPU acceleration for AI training, should evaluate other platforms.

Maximum memory capacity of 3 TB

The system supports up to 3 TB of DDR4 memory across its DIMM slots, allowing significant headroom beyond the installed 256 GB. This ceiling determines whether the server can grow with expanding dataset sizes or increased virtual-machine density. Verify that your application roadmap fits within this limit before committing.

Highlights

  • Dual 10-core Xeon processors at 3.1 GHz for demanding workloads
  • 256 GB DDR4 ECC memory supporting large datasets and virtualization
  • Eight 2.5-inch drive bays with P440 SAS controller for flexible storage
  • Integrated iLO Advanced remote management for lights-out administration
  • Redundant 500 W power supplies maintaining uptime during maintenance

Specifications

BrandHP
SeriesProLiant
ModelRack Mount
TypeRack
CPU TypeIntel Xeon
CPU Speed3.1 GHz
# of Processors Installed2
MAX Processors2
Installed Memory Size256GB
Memory TypeDDR4
Max Memory Capacity3TB
Hard Drive (Installed)4,80
Storage ControllerHPE Smart Array P440 SAS Controller
HDD InterfaceSAS
GPU TypeIntegrated Graphics
Remote ManagementHPE iLO Advanced
Dimensions36 x 24 x 10 in
Weight40

Questions about this item

What rack depth is needed for the 36-inch deep chassis?

The chassis measures 36 inches deep, so the rack must provide at least that depth plus clearance for rear cables and airflow.

How are the two Xeon E5-2687W v3 processors installed, and what step is often missed?

Both CPU sockets are populated; the critical step is applying thermal paste evenly and torquing the heatsink screws in the diagonal sequence shown in the service guide.

When will the 256GB DDR4 ECC Registered memory need replacement or expansion?

Memory runs at 3.1 GHz with the installed CPUs; replace any module that logs correctable ECC errors in iLO, and add DDR4 RDIMMs up to the 3TB limit when workloads demand more capacity.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.