HPE
HPE ProLiant DL380 Gen9 8SFF 2x Xeon E5-2640 v4 192GB DDR4 rack server
Dual Xeon E5-2640 v4 10-core 2.4GHz CPUs with 192GB DDR4 ECC RAM, P440 SAS controller, 8-bay 2.5in SFF chassis and iLO remote management
- TypeRack
- CPU TypeIntel Xeon
- CPU Speed2.4GHz
- # of Processors Installed2
- MAX Processors2
- Installed Memory Size192GB
- Dual Xeon E5-2640 v4 processors provide 10 cores each at 2.4 GHz
- 192 GB DDR4 ECC memory supports demanding virtualisation workloads
- HPE Smart Array P440 SAS controller manages up to eight 2.5 inch drives
- Dual 500 W Flex Slot power supplies deliver redundant power
- HPE iLO Advanced remote management enables full out-of-band control
Dual Xeon server for virtualised workloads
The HPE ProLiant DL380 Gen9 packs two Xeon E5-2640 v4 processors, each running at 2.4 GHz with 10 cores and 25 MB cache. It ships with 192 GB of DDR4 ECC registered memory and supports a maximum of 3 TB. The 8SFF chassis accepts up to eight 2.5 inch drives, though no drives are installed in this configuration. An integrated P440 SAS controller manages RAID across SATA or SAS media.
Thermals and power under typical load
Two 500 W Flex Slot power supplies provide redundancy for the dual-socket platform. The 1U rack form factor relies on internal fans to move air across the CPUs and memory modules. Remote management through iLO Advanced lets administrators monitor temperatures, power draw and fan speeds without being on site. The system ships with firmware updated to the latest stable release after full burn-in testing.
Build quality and daily connectivity
The rack-mount chassis measures 36 by 24 by 10 inches and weighs 40 pounds, fitting standard four-post racks. Networking is handled by an Intel I350 and X540 combination delivering two 10 GbE and two 1 GbE ports. A rail kit is available on request for easier installation and service access. Buyers who need internal storage must add drives separately, and those requiring GPU acceleration will find only integrated graphics on board.
Highlights
- Dual Xeon E5-2640 v4 processors provide 10 cores each at 2.4 GHz
- 192 GB DDR4 ECC memory supports demanding virtualisation workloads
- HPE Smart Array P440 SAS controller manages up to eight 2.5 inch drives
- Dual 500 W Flex Slot power supplies deliver redundant power
- HPE iLO Advanced remote management enables full out-of-band control
Specifications
| Brand | HP |
|---|---|
| Series | ProLiant |
| Model | Rack Mount |
| Type | Rack |
| CPU Type | Intel Xeon |
| CPU Speed | 2.4GHz |
| # of Processors Installed | 2 |
| MAX Processors | 2 |
| Installed Memory Size | 192GB |
| Memory Type | DDR4 |
| Max Memory Capacity | 3TB |
| Hard Drive (Installed) | 7,68 |
| Storage Controller | HPE Smart Array P440 SAS Controller |
| HDD Interface | SATA |
| GPU Type | Integrated Graphics |
| Remote Management | HPE iLO Advanced |
| Dimensions | 36 x 24 x 10 in |
| Weight | 40 |
Questions about this item
How do I install the HPE Smart Array P440 controller and what step is often missed?
Seat the P440 in a PCIe slot, connect the SAS cables to the 8SFF backplane, then enable the controller in UEFI before creating arrays.
Which components will need replacement first in the DL380 Gen9?
The 500W Flex Slot power supplies and system fans are the primary field-replaceable units; DDR4 DIMMs and the 2.4GHz Xeon E5-2640 v4 CPUs rarely fail.
What thermal or power limit appears first during sustained load?
Dual 500W power supplies cap total draw, so prolonged 10-core CPU utilisation will hit the power budget before thermal throttling occurs.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
HPE
HPE P22020B21 2U Cable Management Arm for DL38X Gen10 Plus Rail Kit
$52.99$67.99−22%
0.00067765BTC
In stock
Lenovo
Lenovo ThinkSystem ST250 V3 7DCEA01YNA Tower Server Xeon E-2434 16 GB RAM
$1,267.99
0.01621533BTC
In stock