HPE
HPE ProLiant DL380 Gen9 8SFF 2x Xeon E5-2640 v4 768GB DDR4 rack server
Dual Xeon E5-2640 v4 2.4GHz 10-core server with 768GB DDR4, P440 SAS controller and eight 2.5-inch bays
- TypeRack
- CPU TypeIntel Xeon
- CPU Speed2.4GHz
- # of Processors Installed2
- MAX Processors2
- Installed Memory Size768GB
- Two Xeon E5-2640 v4 processors provide 10 cores each at 2.4GHz
- 768GB DDR4 ECC registered memory supports large virtualisation workloads
- Eight 2.5-inch drive bays with P440 SAS controller enable flexible storage
- Dual 500W flex-slot power supplies maintain uptime during maintenance
- iLO Advanced remote management gives full out-of-band control
HPE DL380 Gen9 8SFF dual Xeon server
The HPE ProLiant DL380 Gen9 8SFF chassis holds two Intel Xeon E5-2640 v4 processors at 2.4GHz with ten cores each and 25MB cache per chip. It ships with 768GB of DDR4 ECC registered memory and a Smart Array P440 SAS controller. The unit is built for virtualisation clusters, database nodes or compute-heavy workloads that need dense 2.5-inch drive bays and integrated 10GbE plus 1GbE networking.
Check rack depth and power before ordering
The server measures 36 by 24 by 10 inches and weighs 40 units, so verify your rack depth and weight rating. Two 500W Flex Slot power supplies are installed; confirm your PDU connectors and available circuits. No drives are included, so plan the quantity and type of 2.5-inch SATA or SAS drives you need. Rail kit is optional and must be requested separately.
8SFF bay layout and iLO remote management
Eight front 2.5-inch bays give high storage density in a 2U form factor while the P440 controller handles RAID without a dedicated battery backup module. Dual redundant power supplies support hot-swap replacement during operation. HPE iLO Advanced provides out-of-band console, virtual media and firmware updates over a dedicated management port, reducing physical visits to the rack.
Highlights
- Two Xeon E5-2640 v4 processors provide 10 cores each at 2.4GHz
- 768GB DDR4 ECC registered memory supports large virtualisation workloads
- Eight 2.5-inch drive bays with P440 SAS controller enable flexible storage
- Dual 500W flex-slot power supplies maintain uptime during maintenance
- iLO Advanced remote management gives full out-of-band control
Specifications
| Brand | HP |
|---|---|
| Series | ProLiant |
| Model | Rack Mount |
| Type | Rack |
| CPU Type | Intel Xeon |
| CPU Speed | 2.4GHz |
| # of Processors Installed | 2 |
| MAX Processors | 2 |
| Installed Memory Size | 768GB |
| Memory Type | DDR4 |
| Max Memory Capacity | 3TB |
| Hard Drive (Installed) | 15,36 |
| Storage Controller | HPE Smart Array P440 SAS Controller |
| HDD Interface | SATA |
| GPU Type | Integrated Graphics |
| Remote Management | HPE iLO Advanced |
| Dimensions | 36 x 24 x 10 in |
| Weight | 40 |
Questions about this item
Does the server ship with drives in the eight 2.5-inch bays or must they be purchased separately?
The 8SFF chassis arrives without any drives installed; the 15,36 figure in the listing refers to the controller's capacity limit, not to populated bays. You will need to supply your own 2.5-inch SATA or SAS drives.
Which memory configuration should I choose if I need room to grow beyond the installed 768GB?
The board supports up to 3TB of DDR4 ECC Registered memory, so the current 768GB leaves ample headroom for future expansion without replacing existing modules.
What does the dual Xeon E5-2640 v4 2.4GHz 10-core setup deliver for virtualization workloads?
Twenty total cores at 2.4GHz with 25MB cache per processor provide strong multi-threaded performance for dense VM deployments, backed by the P440 SAS controller and dual 10GbE ports for storage and network throughput.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



