We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

HPE

HPE ProLiant DL380 Gen9 8SFF 2x Xeon E5-2650 v3 256GB DDR4 rack server

SKU CH-KCKM-NRN5B

Dual Xeon E5-2650 v3 2.3GHz 10-core rack server with 256GB DDR4, P440 SAS controller, 8 SFF bays and iLO remote management

  • TypeRack
  • CPU TypeIntel Xeon
  • CPU Speed2.3GHz
  • # of Processors Installed2
  • MAX Processors2
  • Installed Memory Size256GB
  • Dual 10-core Xeon 2.3 GHz processors deliver high throughput
  • 256 GB DDR4 ECC memory supports large virtualisation workloads
  • Eight 2.5-inch drive bays with P440 SAS controller enable flexible storage
  • Dual 10 GbE and dual 1 GbE ports provide high-speed connectivity
  • HPE iLO Advanced remote management simplifies server administration

Dual-socket DL380 Gen9 for virtualization

This 2U rack server ships with two Xeon E5-2650 v3 processors running at 2.3 GHz, providing twenty cores and 256 GB of DDR4 ECC registered memory for multi-threaded applications. The eight-bay 2.5-inch chassis uses a Smart Array P440 SAS controller so you can populate the bays with the exact mix of SAS drives your workload requires.

Suits virtualization hosts needing dense compute

Buyers who want more than eight drive bays or require a different drive interface should look elsewhere. The integrated Intel I350 and X540 network adapters deliver two 10 GbE and two 1 GbE ports, while dual 500 W flex-slot power supplies and iLO Advanced remote management keep the platform serviceable in a lights-out data centre.

Eight 2.5-inch SAS bays driven by a P440 controller

The single specification that decides fit is the eight-bay SAS backplane paired with the P440 RAID controller; if your deployment needs more bays or a different storage protocol this chassis will not match.

Highlights

  • Dual 10-core Xeon 2.3 GHz processors deliver high throughput
  • 256 GB DDR4 ECC memory supports large virtualisation workloads
  • Eight 2.5-inch drive bays with P440 SAS controller enable flexible storage
  • Dual 10 GbE and dual 1 GbE ports provide high-speed connectivity
  • HPE iLO Advanced remote management simplifies server administration

Specifications

BrandHP
SeriesProLiant
ModelRack Mount
TypeRack
CPU TypeIntel Xeon
CPU Speed2.3GHz
# of Processors Installed2
MAX Processors2
Installed Memory Size256GB
Memory TypeDDR4
Max Memory Capacity3TB
Hard Drive (Installed)7,20
Storage ControllerHPE Smart Array P440 SAS Controller
HDD InterfaceSAS
GPU TypeIntegrated Graphics
Remote ManagementHPE iLO Advanced
Dimensions36 x 24 x 10 in
Weight40

Questions about this item

What rack depth does the 36-inch deep chassis need for proper mounting?

The server is 36 inches deep, so the rack must provide at least 36 inches of usable depth from the front mounting rails to the rear door or cable management.

Which rails are required to install the 8SFF chassis in a standard rack?

A rail kit is available on request; the chassis slides into the rails and locks with the quick-release latches, and the step often missed is fully extending both inner rails before seating the server.

When should the 500W Flex Slot power supplies be checked or replaced?

Inspect the power-supply LEDs during routine maintenance; replace a unit if its amber fault light stays on or if iLO reports a power-supply degradation event.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.