We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

HPE

HPE ProLiant DL380 Gen9 8SFF 2x Xeon E5-2667v3 256GB DDR4

SKU CH-QB1C-06X6E

Rack server with two 3.2 GHz Xeon processors, 256 GB DDR4 memory and eight 2.5-inch drive bays ready for SAS or SATA storage

  • TypeRack
  • CPU TypeIntel Xeon
  • CPU Speed3.2GHz
  • # of Processors Installed2
  • MAX Processors2
  • Installed Memory Size256GB
  • Dual Xeon E5-2667v3 at 3.2GHz deliver high single-thread speed
  • 256GB DDR4 ECC registered memory supports large virtualisation workloads
  • HPE Smart Array P440 SAS controller manages up to 8 SFF drives
  • iLO Advanced remote management enables full out-of-band control
  • 2× 500W Flex Slot power supplies provide redundant power

Dual Xeon E5-2667v3 Server

The HPE ProLiant DL380 Gen9 is a 2U rack server built for virtualisation hosts, database nodes and compute clusters that demand high single-thread speed. Two eight-core Xeon E5-2667v3 processors run at a base 3.2GHz, delivering sixteen threads with 20MB of cache each. The 256GB of DDR4 ECC registered memory supports large working sets, while eight 2.5-inch drive bays connect through an HPE Smart Array P440 SAS controller for flexible storage layouts.

Sustained Load Behaviour

Under continuous workloads the twin CPUs maintain their 3.2GHz base frequency across all cores, avoiding the frequency drop seen in burst-only benchmarks. The P440 controller handles steady random I/O without throttling, and the four-port network card — two 10GbE and two 1GbE links — keeps throughput stable for east-west cluster traffic. ECC memory corrects single-bit errors on the fly, preventing silent data corruption during long-running jobs.

Thermals Noise Power

Redundant 500W Flex Slot power supplies share the load, drawing only what the configuration requires and allowing hot-swap replacement without downtime. HPE's thermal design directs front-to-rear airflow through the 8SFF chassis, keeping component temperatures within spec in standard data-centre aisles. Fan speed ramps gradually with inlet temperature, so acoustic output stays low in typical rack rows while headroom remains for higher-density deployments.

Highlights

  • Dual Xeon E5-2667v3 at 3.2GHz deliver high single-thread speed
  • 256GB DDR4 ECC registered memory supports large virtualisation workloads
  • HPE Smart Array P440 SAS controller manages up to 8 SFF drives
  • iLO Advanced remote management enables full out-of-band control
  • 2× 500W Flex Slot power supplies provide redundant power

Specifications

BrandHP
SeriesProLiant
ModelRack Mount
TypeRack
CPU TypeIntel Xeon
CPU Speed3.2GHz
# of Processors Installed2
MAX Processors2
Installed Memory Size256GB
Memory TypeDDR4
Max Memory Capacity3TB
Hard Drive (Installed)3,84
Storage ControllerHPE Smart Array P440 SAS Controller
HDD InterfaceSATA
GPU TypeIntegrated Graphics
Remote ManagementHPE iLO Advanced
Dimensions36 x 24 x 10 in
Weight40

Questions about this item

How much power do the dual 500W flex-slot supplies draw when the server runs 24/7?

The chassis includes two 500W Flex Slot power supplies; actual draw depends on workload but the units are rated for 500W each.

Which drive trays and caddies must I supply to populate the 8SFF bays?

The 8SFF chassis accepts 2.5-inch SAS or SATA drives; trays are not included and must be sourced separately.

Will the P440 controller and iLO remote management work with my existing Gen8 rack infrastructure?

The P440 SAS controller and iLO Advanced are standard Gen9 components and operate independently of Gen8 hardware.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.