HPE
HPE ProLiant DL380 Gen9 8SFF 2x Xeon E5-2680 v3 768GB DDR4 rack server
A 2U rack server with two 12-core Xeon processors, 768GB DDR4 memory and an eight-bay SAS controller ready for custom storage
- TypeRack
- CPU TypeIntel Xeon
- CPU Speed2.5GHz
- # of Processors Installed2
- MAX Processors2
- Installed Memory Size768GB
- Dual 12-core Xeon 2680 processors deliver 24 threads for heavy workloads
- 768GB DDR4 ECC memory supports large virtualisation and database environments
- Eight 2.5-inch drive bays with P440 SAS controller enable flexible storage arrays
- Dual 10GbE plus dual 1GbE ports provide high-throughput network connectivity
- iLO Advanced remote management allows full out-of-band server control
Configuration Ready
This HPE ProLiant DL380 Gen9 arrives with dual Xeon E5-2680 v3 processors and 768GB DDR4 memory installed. The 8SFF chassis supports up to eight 2.5-inch drives for flexible storage layouts. It suits virtualisation hosts, database nodes or compute clusters that need dense memory and CPU cores.
Thermal and Power Profile
Two 500W Flex Slot power supplies deliver redundancy for continuous operation. The P440 SAS controller manages drive I/O without adding discrete GPU heat. Integrated graphics keep power draw focused on compute rather than display output.
Remote Management Included
HPE iLO Advanced provides out-of-band control for firmware updates, power cycling and console access. The quad-port network card adds two 10GbE and two 1GbE links for separate management and data traffic. Rail kits are available on request for rack installation.
Highlights
- Dual 12-core Xeon 2680 processors deliver 24 threads for heavy workloads
- 768GB DDR4 ECC memory supports large virtualisation and database environments
- Eight 2.5-inch drive bays with P440 SAS controller enable flexible storage arrays
- Dual 10GbE plus dual 1GbE ports provide high-throughput network connectivity
- iLO Advanced remote management allows full out-of-band server control
Specifications
| Brand | HP |
|---|---|
| Series | ProLiant |
| Model | Rack Mount |
| Type | Rack |
| CPU Type | Intel Xeon |
| CPU Speed | 2.5GHz |
| # of Processors Installed | 2 |
| MAX Processors | 2 |
| Installed Memory Size | 768GB |
| Memory Type | DDR4 |
| Max Memory Capacity | 3TB |
| Hard Drive (Installed) | 7,68 |
| Storage Controller | HPE Smart Array P440 SAS Controller |
| HDD Interface | SATA |
| GPU Type | Integrated Graphics |
| Remote Management | HPE iLO Advanced |
| Dimensions | 36 x 24 x 10 in |
| Weight | 40 |
Questions about this item
How do I install the P440 SAS controller in the DL380 Gen9 and what step is commonly missed?
Seat the P440 PCIe SAS controller firmly in the PCIe slot, then connect the SAS cables from the controller to the 8SFF backplane; the step often missed is enabling the controller in the BIOS and creating the logical drives before installing an operating system.
What maintenance will the 768GB DDR4 ECC registered memory require over time?
The DDR4 ECC registered modules are solid-state and need no scheduled replacement; run the built-in memory diagnostics periodically and replace any DIMM that reports correctable errors to avoid uncorrectable failures later.
What thermal or power limit appears first when both Xeon E5-2680 v3 processors run at full load continuously?
With two 12-core 2.5 GHz Xeon E5-2680 v3 CPUs and dual 500 W Flex Slot power supplies, the power budget of the 500 W units is typically the first constraint under sustained full-load operation.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



