HPE
HPE ProLiant DL380 Gen9 8SFF rack server 2x Xeon E5-2690 v4 384GB DDR4
A 2U rack server with dual 14-core Xeon processors at 2.6 GHz, 384 GB DDR4 ECC memory, eight 2.5-inch drive bays, a P440 SAS controller and dual 10 GbE plus 1 GbE networking
- TypeRack
- CPU TypeIntel Xeon
- CPU Speed2.6GHz
- # of Processors Installed2
- MAX Processors2
- Installed Memory Size384GB
- Dual Xeon E5-2690 v4 processors with 14 cores each handle heavy workloads
- 384GB DDR4 ECC registered memory supports large datasets and virtualization
- 8 SFF drive bays accept 2.5-inch SAS or SATA drives for flexible storage
- HPE Smart Array P440 SAS controller provides hardware RAID for data protection
- HPE iLO Advanced remote management enables out-of-band server control
ProLiant DL380 Gen9 8SFF 2×Xeon 384GB DDR4
This HPE ProLiant DL380 Gen9 rack server ships with two Xeon E5-2690 v4 processors at 2.6GHz and 384GB of DDR4 ECC registered memory. The 8SFF chassis supports up to eight 2.5-inch drive bays and includes an HPE Smart Array P440 SAS controller. Integrated iLO Advanced remote management and dual 500W Flex Slot power supplies complete the base configuration. No drives are installed.
Suited for memory-heavy workloads not
The 384GB DDR4 capacity suits virtualisation hosts, in-memory databases and compute clusters that prioritise RAM over local storage. Buyers who need ready-to-run storage arrays should look elsewhere because the server ships without drives. Organisations requiring newer instruction sets or higher single-thread frequency will need a different platform.
384GB DDR4 ECC registered memory decides fit
The installed 384GB of DDR4 ECC registered memory is the primary constraint for workload sizing. Each processor provides 14 cores and 35MB cache. The P440 controller manages SAS and SATA drives across the eight 2.5-inch bays. Network connectivity includes two 10GbE and two 1GbE ports. Maximum supported memory reaches 3TB.
Highlights
- Dual Xeon E5-2690 v4 processors with 14 cores each handle heavy workloads
- 384GB DDR4 ECC registered memory supports large datasets and virtualization
- 8 SFF drive bays accept 2.5-inch SAS or SATA drives for flexible storage
- HPE Smart Array P440 SAS controller provides hardware RAID for data protection
- HPE iLO Advanced remote management enables out-of-band server control
Specifications
| Brand | HP |
|---|---|
| Series | ProLiant |
| Model | Rack Mount |
| Type | Rack |
| CPU Type | Intel Xeon |
| CPU Speed | 2.6GHz |
| # of Processors Installed | 2 |
| MAX Processors | 2 |
| Installed Memory Size | 384GB |
| Memory Type | DDR4 |
| Max Memory Capacity | 3TB |
| Hard Drive (Installed) | 7,68 |
| Storage Controller | HPE Smart Array P440 SAS Controller |
| HDD Interface | SATA |
| GPU Type | Integrated Graphics |
| Remote Management | HPE iLO Advanced |
| Dimensions | 36 x 24 x 10 in |
| Weight | 40 |
Questions about this item
What clearance does the 36 x 24 x 10 inch chassis need for front-to-back airflow in a rack?
The 36-inch depth requires adequate rear clearance for cable management and exhaust; allow at least 6 inches behind the unit for airflow and connector access.
How are the two Xeon E5-2690 v4 processors and 384GB DDR4 ECC registered memory installed?
Both processors are factory-installed in the dual sockets; the 384GB DDR4 ECC registered memory is pre-populated across the 24 DIMM slots in a balanced configuration optimised for the 14-core CPUs.
When will the P440 SAS controller or the two 500W Flex Slot power supplies need replacement?
The P440 controller and 500W power supplies are field-replaceable units; monitor iLO alerts for predictive failure warnings and replace modules when the health LED shows amber or critical status.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



