HPE
HPE ProLiant DL380 Gen9 8SFF rack server 2x Xeon E5-2699 v3 384GB DDR4
Dual 18-core Xeon processors and 384GB DDR4 memory in an 8-bay 2.5-inch rack server ready for custom storage
- TypeRack
- CPU TypeIntel Xeon
- CPU Speed2.3GHz
- # of Processors Installed2
- MAX Processors2
- Installed Memory Size384GB
- Dual 18-core Xeon processors at 2.3GHz deliver heavy multi-thread throughput
- 384GB DDR4 ECC registered memory supports large virtualisation workloads
- Eight 2.5-inch SAS drive bays with P440 RAID controller enable flexible storage arrays
- Dual 10GbE plus dual 1GbE ports provide high-bandwidth network connectivity
- iLO Advanced remote management allows full out-of-band server control
Dual 18-core Xeon rack server
The HPE ProLiant DL380 Gen9 arrives as a 2U rack-mount system populated with two Xeon E5-2699 v3 processors running at 2.3GHz. Each CPU delivers 18 cores and 45MB of cache for a total of 36 cores across the platform. The chassis supports up to eight 2.5-inch SAS drive bays behind the front bezel. This configuration targets virtualisation hosts, database clusters and compute-heavy workloads that benefit from high core density in a standard rack footprint.
Dual 500W supplies with updated firmware
Two 500W Flex Slot power supplies share the load and provide redundancy for the fully populated CPU and memory configuration. BIOS and firmware are updated to the latest stable release before dispatch and the unit undergoes a full diagnostic burn-in. Integrated iLO Advanced remote management allows out-of-band monitoring of thermals, power draw and system health without requiring an operating system to be running.
P440 SAS controller plus 10GbE networking
The installed Smart Array P440 PCIe SAS controller manages RAID across the eight drive bays and supports mixed SAS and SSD media. A quad-port Intel network card adds two 10GbE and two 1GbE connections for high-throughput east-west traffic. Rail kits are available on request and the server ships without drives so storage can be specified to match capacity and performance requirements.
Highlights
- Dual 18-core Xeon processors at 2.3GHz deliver heavy multi-thread throughput
- 384GB DDR4 ECC registered memory supports large virtualisation workloads
- Eight 2.5-inch SAS drive bays with P440 RAID controller enable flexible storage arrays
- Dual 10GbE plus dual 1GbE ports provide high-bandwidth network connectivity
- iLO Advanced remote management allows full out-of-band server control
Specifications
| Brand | HP |
|---|---|
| Series | ProLiant |
| Model | Rack Mount |
| Type | Rack |
| CPU Type | Intel Xeon |
| CPU Speed | 2.3GHz |
| # of Processors Installed | 2 |
| MAX Processors | 2 |
| Installed Memory Size | 384GB |
| Memory Type | DDR4 |
| Max Memory Capacity | 3TB |
| Hard Drive (Installed) | 7,20 |
| Storage Controller | HPE Smart Array P440 SAS Controller |
| HDD Interface | SAS |
| GPU Type | Integrated Graphics |
| Remote Management | HPE iLO Advanced |
| Dimensions | 36 x 24 x 10 in |
| Weight | 40 |
Questions about this item
How do I install drives in the 8SFF chassis and what step is often missed?
Slide each 2.5-inch SAS drive into the front bays until the latch clicks, then use the P440 controller BIOS or iLO to create the logical array before installing an OS.
Which components will need replacement first under continuous operation?
The two 500 W Flex Slot power supplies and the system fans are the primary field-replaceable units that wear out first.
What thermal or power limit appears first when both 18-core CPUs run at 2.3 GHz sustained?
The dual 500 W power supplies set the combined power ceiling, so prolonged full-load compute will hit that limit before memory or I/O saturates.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



