HPE
HPE ProLiant MicroServer Gen10 Plus v2 Tower Server Xeon E-2314 2.8GHz 64GB 16TB HDD
A compact tower server with a 4-core Xeon E-2314 at 2.8 GHz, 64 GB DDR4 and 16 TB across four 3.5-inch SATA drives, plus integrated Lights-Out remote management
- Xeon E-2314 four cores reach 4.5GHz turbo
- 64GB DDR4 3200MHz memory handles heavy workloads
- 16TB across four 3.5in SATA drives stores large datasets
- Smart Array VROC controller protects data with RAID
- iLO remote management enables headless server control
Compact Xeon Tower for Small Business
The HPE ProLiant MicroServer Gen10 Plus v2 is a tower server built around a Xeon E-2314 4-core processor running at 2.8GHz with 4.5GHz turbo. It ships with 64GB of DDR4 3200MHz unbuffered memory in two 32GB modules and 16TB of total storage across four 4TB SATA 3.5-inch hard drives. Drives and memory arrive separately and require installation before use.
Suited for File and Light Application Hosting
This configuration fits small businesses needing a quiet, secure tower for file sharing, backup or lightweight virtualisation. The four-bay chassis supports RAID via Smart Array VROC and remote management through integrated iLO. Buyers who require more than four drive bays, redundant power supplies or 10GbE networking out of the box should evaluate larger platforms.
Four-Bay SATA Chassis Defines Storage Limits
The server provides four 3.5-inch SATA 6Gb/s bays populated with the included 4TB drives, giving 16TB raw capacity. Expansion beyond these four bays is not possible in this form factor, so storage growth depends on replacing drives with higher-capacity SATA models. Memory currently occupies both slots with 32GB modules, so any increase means swapping modules rather than adding.
Highlights
- Xeon E-2314 four cores reach 4.5GHz turbo
- 64GB DDR4 3200MHz memory handles heavy workloads
- 16TB across four 3.5in SATA drives stores large datasets
- Smart Array VROC controller protects data with RAID
- iLO remote management enables headless server control
Specifications
No published specifications for this item yet.
Questions about this item
What drive bays does the 16TB of 3.5 SATA HDD storage use?
The 16TB consists of four 4TB SATA HDDs that install into the four internal 3.5-inch drive bays.
Which memory slots do the two 32GB DDR4 modules occupy?
Install the two 32GB DDR4 PC4-25600 3200MHz unbuffered DIMMs into the two available UDIMM slots on the motherboard.
When should the 3.5-inch SATA hard drives be replaced?
Replace any 3.5-inch SATA HDD when SMART alerts indicate failure or when the RAID array reports a degraded state.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



