HPE
HPE ProLiant MicroServer Gen10 Plus v2 Xeon E-2314 2.8GHz 64GB 16TB SSD RAID iLo 2022 Essentials tower server
Compact tower server with Xeon E-2314 processor, 64GB DDR4 memory, 16TB SATA SSD storage, RAID and iLO remote management for up to 25 users
- Xeon E-2314 4-core 2.8 GHz up to 4.5 GHz turbo for responsive small-business workloads
- 64 GB DDR4 3200 MHz memory in two 32 GB modules for smooth multitasking
- 16 TB across four 4 TB SATA SSDs delivering ultra-fast storage capacity
- Smart Array VROC RAID controller protects data with hardware redundancy
- iLO remote management plus UEFI Secure Boot and secure erase for simplified security
Ready-to-deploy small-business server
This HPE ProLiant MicroServer Gen10 Plus v2 arrives configured with a Xeon E-2314 four-core processor at 2.8 GHz, 64 GB of DDR4 memory and 16 TB of SATA SSD storage. It ships with Windows Server 2022 Essentials media for environments of up to 25 users and 50 devices.
Replaces older entry towers when remote management
The integrated Lights-Out controller adds out-of-band access that basic towers lack, making the step up worthwhile for branch offices without on-site IT staff. Four embedded 1 Gb ports and a Smart Array VROC RAID controller consolidate networking and storage duties in one box.
Memory and drives ship loose for on-site assembly
Two 32 GB DDR4 modules and four 4 TB SSDs must be installed before first boot, so allow time for that work. The single power supply means no redundancy, and the 10-core Essentials licence caps the user count at the stated limit.
Highlights
- Xeon E-2314 4-core 2.8 GHz up to 4.5 GHz turbo for responsive small-business workloads
- 64 GB DDR4 3200 MHz memory in two 32 GB modules for smooth multitasking
- 16 TB across four 4 TB SATA SSDs delivering ultra-fast storage capacity
- Smart Array VROC RAID controller protects data with hardware redundancy
- iLO remote management plus UEFI Secure Boot and secure erase for simplified security
Specifications
No published specifications for this item yet.
Questions about this item
What drive bays and form factor do the four 4 TB SSDs need to fit in this MicroServer Gen10 Plus v2?
The server uses four 3.5-inch SATA drive bays; each 4 TB SSD is a 2.5-inch drive that mounts in a supplied 3.5-inch carrier tray.
How are the two 32 GB DDR4 modules installed, and which slot order is often missed?
Insert both modules into the two UDIMM slots (one per channel) until the side clips click; the common error is seating only one clip.
When will the embedded iLO remote-management licence need renewal or replacement?
iLO 5 is embedded with no separate licence; firmware updates are downloaded from HPE and applied as needed for security patches.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



