We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
HPE ProLiant ML30 Gen10 Plus tower server in silver chassis with front drive bays

HPE

HPE ProLiant ML30 Gen10 Plus Tower Server Xeon E-2314 128GB 48TB

SKU CH-DDN9-HG617

Tower server with Xeon E-2314, 128GB DDR4, 48TB SATA storage, RAID and iLO 5 remote management

  • 4-core Xeon E-2314 at 2.8GHz with 4.5GHz turbo for responsive compute
  • 128GB DDR4 3200MHz memory across four 32GB modules handles heavy workloads
  • 48TB raw storage via four 12TB SATA 3.5in drives for large datasets
  • iLO 5 Standard enables remote management and monitoring from anywhere
  • Four PCIe slots plus M.2 provide flexible expansion for future needs

Tower Server for Small Business and Remote Offices

The HPE ProLiant ML30 Gen10 Plus tower server targets small businesses and remote offices needing local compute and storage. It ships with a Xeon E-2314 4-core processor running at 2.8GHz with turbo up to 4.5GHz. The system includes 128GB of DDR4 3200MHz unbuffered memory across four 32GB modules. Buyers who need rackmount form factors or redundant power supplies should look elsewhere.

Memory and Storage Kits Require Installation

The 128GB DDR4 memory kit and 48TB of SATA storage arrive as separate components, not pre-installed. Four 12TB 3.5-inch SATA hard drives provide the raw capacity, while the Smart Array VROC controller manages RAID configuration. The DVD-ROM drive is included for legacy media access. Administrators who expect a ready-to-run appliance must allocate time for hardware assembly and initial array setup.

Expansion Slots and Remote Management

Four PCIe expansion slots and an M.2 slot allow adding network cards, accelerators or additional storage controllers. Dual-port 1Gb Ethernet via the Broadcom BCM5720 adapter handles baseline connectivity. iLO 5 Standard provides out-of-band remote management for power control and hardware monitoring. Physical security features include a padlock eye, bezel lock and Kensington slot. The single cabled power supply means no hot-swap redundancy for mission-critical uptime requirements.

Highlights

  • 4-core Xeon E-2314 at 2.8GHz with 4.5GHz turbo for responsive compute
  • 128GB DDR4 3200MHz memory across four 32GB modules handles heavy workloads
  • 48TB raw storage via four 12TB SATA 3.5in drives for large datasets
  • iLO 5 Standard enables remote management and monitoring from anywhere
  • Four PCIe slots plus M.2 provide flexible expansion for future needs

Specifications

No published specifications for this item yet.

Questions about this item

How often will the four 12TB SATA drives in the 48TB RAID array need replacement?

Mechanical drives in a RAID set should be monitored via iLO 5; plan on swapping any disk that reports predictive-failure alerts, typically after several years of continuous operation.

What limit appears first when the Xeon E-2314 runs at 4.5 GHz Turbo for extended periods?

The single cabled power supply and tower airflow set the practical ceiling; sustained all-core Turbo will hit thermal or power-headroom limits before the CPU itself throttles.

How loud and hot does the tower get with 128GB DDR4 and four 3.5-inch drives running all day?

Expect noticeable fan noise and warm exhaust air; the single cabled supply and embedded Broadcom BCM5720 dual 1Gb NICs add to the steady heat load inside the chassis.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.