HPE
HPE ProLiant ML350 Gen11 4U Tower Server Dual Xeon 4410y 12-Core 2.00 GHz 1TB DDR5 61.44TB SAS
4U tower server with dual 12-core Xeon 4410y processors, 1 TB DDR5 memory and 61.44 TB enterprise SAS SSD storage
- TypeTower
- CPU TypeIntel Xeon
- MAX Processors2
- Memory TypeDDR5
- Max Memory Capacity1TB
- Dual Xeon Silver 4410y 12-core CPUs deliver strong multi-threaded performance
- 1 TB DDR5-4800 ECC memory supports large virtualised workloads
- 44 TB enterprise SAS SSD storage provides high-capacity fast data access
- Redundant hot-swap power supplies keep the server running during a PSU failure
- Embedded 4-port 1 GbE and iLO 6 simplify remote management
HPE ProLiant ML350 Gen11 4U Tower Server
The HPE ProLiant ML350 Gen11 is a 4U tower server built for hybrid environments and virtualized workloads. It ships with dual Xeon Silver 4410y 12-core processors running at 2.00 GHz with a 3.90 GHz turbo frequency. The system includes 1TB of DDR5-4800MHz ECC buffered memory across 16 modules of 64GB each. A total of 61.44TB enterprise SAS storage is provided via eight 7.68TB 2.5-inch SSDs connected through an MR408i-o Gen11 controller with 4GB cache.
Memory and storage installation required before use
Memory modules and storage drives are supplied separately and must be installed prior to deployment. Verify that your rack or floor space accommodates a 4U tower form factor with redundant power supplies. The server includes an embedded 4-port 1GbE OCP3 network adapter and an OCP storage controller using x8 lanes. Ensure your infrastructure supports SAS 12Gb/s connectivity and the required power input for dual supplies. Remote management is handled by integrated iLO 6 with Intelligent Provisioning.
Hot-swap power and iLO 6 simplify ongoing operations
Redundant hot-swappable power supplies allow a failed unit to be replaced without taking the server offline. The iLO 6 Standard licence provides remote console access, health monitoring and firmware updates over a dedicated management port. The MR408i-o controller with 4GB cache enables hardware RAID configuration across the eight SAS SSDs. The OCP3 form factor for networking and storage controllers leaves standard PCIe Gen5 slots available for additional expansion cards.
Highlights
- Dual Xeon Silver 4410y 12-core CPUs deliver strong multi-threaded performance
- 1 TB DDR5-4800 ECC memory supports large virtualised workloads
- 44 TB enterprise SAS SSD storage provides high-capacity fast data access
- Redundant hot-swap power supplies keep the server running during a PSU failure
- Embedded 4-port 1 GbE and iLO 6 simplify remote management
Specifications
| Type | Tower |
|---|---|
| CPU Type | Intel Xeon |
| MAX Processors | 2 |
| Memory Type | DDR5 |
| Max Memory Capacity | 1TB |
Questions about this item
Does the HPE ProLiant ML350 Gen11 arrive with the 16 DDR5 64 GB modules and the eight 7.68 TB SAS SSDs already installed?
The 1 TB DDR5-4800 memory kit (16 x 64 GB) and the 61.44 TB SAS SSD set (8 x 7.68 TB) are included but ship separately; both require installation before use.
Which Xeon configuration does this bundle provide — single or dual processor?
The bundle includes two Xeon Silver 4410y 12-core CPUs running at 2.00 GHz with 30 MB cache and up to 3.90 GHz turbo.
What usable capacity does the 61.44 TB SAS SSD array deliver once the MR408i-o controller builds a RAID volume?
Eight 7.68 TB enterprise SAS SSDs give 61.44 TB raw; the MR408i-o with 4 GB cache supports RAID levels that will reduce usable space depending on the chosen redundancy scheme.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



