HPE
HPE ProLiant ML350 Gen11 Tower Server Dual Xeon 4410y 256GB DDR5 30.72TB SATA SSD
Tower server with dual 12-core Xeon 4410y CPUs, 256 GB DDR5 memory and 30.72 TB SATA SSD storage
- TypeTower
- CPU TypeIntel Xeon
- MAX Processors2
- Memory TypeDDR5
- Max Memory Capacity256GB
- Dual 12-core Xeon Silver 4410y processors deliver up to 3.90 GHz turbo performance
- 256GB DDR5-4800 ECC buffered memory supports demanding virtualized workloads
- 72TB enterprise SATA SSD storage across four 7.68TB drives
- Redundant hot-swappable power supplies maintain uptime during component replacement
- Embedded 4-port 1GbE OCP3 adapter plus MR408i-o storage controller with 4GB cache
Dual Xeon 4410y Tower Server
The HPE ProLiant ML350 Gen11 is a 2P tower server built for organisations that run virtualised workloads, databases or many simultaneous applications. It ships with two Xeon Silver 4410y 12-core processors at 2.00 GHz with up to 3.90 GHz turbo, 256 GB of DDR5-4800 ECC buffered memory and 30.72 TB of enterprise SATA SSD storage. Buyers who need a rack-mount form factor or a single-processor configuration should look elsewhere.
4 x 7.68 TB Enterprise SATA SSDs
Four 7.68 TB 2.5-inch SATA III solid-state drives provide the 30.72 TB raw capacity and connect through the MR408i-o Gen11 storage controller with 4 GB cache. The drives and memory modules are supplied separately and must be installed before the server enters production. This arrangement means the system arrives without a pre-configured RAID volume or an operating system loaded.
PCIe Gen5 and 1 GbE Networking
The platform uses PCIe Gen5 lanes for internal expansion and an embedded OCP3 adapter with four 1 GbE ports for network connectivity. Remote management is handled by integrated iLO 6 with Intelligent Provisioning, while redundant hot-swap power supplies keep the server running during a module replacement. The 1 GbE links limit throughput for bandwidth-heavy east-west traffic unless additional network adapters are added.
Highlights
- Dual 12-core Xeon Silver 4410y processors deliver up to 3.90 GHz turbo performance
- 256GB DDR5-4800 ECC buffered memory supports demanding virtualized workloads
- 72TB enterprise SATA SSD storage across four 7.68TB drives
- Redundant hot-swappable power supplies maintain uptime during component replacement
- Embedded 4-port 1GbE OCP3 adapter plus MR408i-o storage controller with 4GB cache
Specifications
| Type | Tower |
|---|---|
| CPU Type | Intel Xeon |
| MAX Processors | 2 |
| Memory Type | DDR5 |
| Max Memory Capacity | 256GB |
Questions about this item
How often will the 256GB DDR5 memory need replacement?
The 256GB DDR5-4800MHz ECC buffered memory is designed for continuous server operation and does not require scheduled replacement under normal conditions.
What limits the 30.72TB SATA SSD array during sustained write workloads?
The SATA III 6Gbps interface on the four 7.68TB enterprise SSDs sets the maximum sustained throughput ceiling for the storage subsystem.
How much heat and power do the dual Xeon 4410y processors generate at full load?
Two Xeon Silver 4410y CPUs with 12 cores each, running up to 3.90 GHz turbo, are cooled by the 4U tower airflow and fed by redundant hot-swap power supplies.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



