We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
HPE ProLiant ML350 Gen9 8SFF rack server, black metal chassis with front drive bays

HPE

HPE ProLiant ML350 Gen9 8SFF rack server 2× Xeon E5-2683 v4 2.1GHz 768GB DDR4

SKU CH-KVEE-6KHKK

Rack server with dual Xeon processors, 768GB DDR4 memory and eight 2.5-inch drive bays

  • TypeRack
  • CPU TypeIntel Xeon
  • CPU Speed2.1GHz
  • # of Processors Installed2
  • MAX Processors2
  • Installed Memory Size768GB
  • Dual Xeon E5-2683 v4 processors provide 16 cores each for multi-threaded workloads
  • 768GB DDR4 ECC registered memory supports large datasets and virtualisation
  • HPE Smart Array P440 SAS controller enables flexible RAID storage configuration
  • Dual 500W flex-slot power supplies deliver redundant power protection
  • HPE iLO Advanced remote management allows full out-of-band server control

Rack server for dense compute

The HPE ProLiant ML350 Gen9 packs two Xeon E5-2683 v4 processors running at 2.1GHz and 768GB of DDR4 memory into a 10U rack chassis that supports eight 2.5-inch drive bays. It targets teams running virtualisation clusters, database workloads or HPC jobs that need high core counts and large memory capacity in a standard rack footprint.

Upgrade from smaller memory or single-socket systems

Moving from a single-socket box or a configuration below 768GB DDR4 makes sense when workloads exceed the memory ceiling or when licence costs favour fewer, denser nodes. The jump is worth it when you can consolidate multiple older hosts onto this platform and still leave headroom up to the 1536GB maximum.

Tool-less rail install with controller checks

The server slides into a rack on the included rail kit and uses tool-less drive carriers for the eight SAS bays. Common issues are mismatched drive carriers, forgetting to cable the P440 controller to the backplane, and leaving the iLO network port disconnected so remote management is unavailable after the first boot.

Highlights

  • Dual Xeon E5-2683 v4 processors provide 16 cores each for multi-threaded workloads
  • 768GB DDR4 ECC registered memory supports large datasets and virtualisation
  • HPE Smart Array P440 SAS controller enables flexible RAID storage configuration
  • Dual 500W flex-slot power supplies deliver redundant power protection
  • HPE iLO Advanced remote management allows full out-of-band server control

Specifications

BrandHP
SeriesProLiant
ModelRack Mount
TypeRack
CPU TypeIntel Xeon
CPU Speed2.1GHz
# of Processors Installed2
MAX Processors2
Installed Memory Size768GB
Memory TypeDDR4
Max Memory Capacity1536GB
Hard Drive (Installed)4,80
Storage ControllerHPE Smart Array P440 SAS Controller
HDD InterfaceSAS
GPU TypeIntegrated Graphics
Remote ManagementHPE iLO Advanced
Dimensions36 x 24 x 10 in
Weight40

Questions about this item

What rack dimensions does the 36 x 24 x 10 inch chassis require?

The chassis is 36 inches deep, 24 inches wide and 10 inches high, so a rack with at least that usable depth and width will accommodate it.

What is the correct order for seating the two Xeon E5-2683 v4 processors and the 768GB DDR4 memory during installation?

Install both processors first, then populate the memory slots according to the board's population rules; skipping the processor‑first step leaves memory unrecognised.

When should the two 500W Flex Slot power supplies be replaced to maintain redundancy?

Replace a supply as soon as iLO reports a fault or the front‑panel LED turns amber; running on a single unit removes N+1 redundancy.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.