We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Pink ATX mid-tower case with full mesh front, louvered top vent and tempered glass side panel

HYTE

HYTE X50 CS-HYTE-X50G-SM PC case Pink

SKU CH-RJVH-47JZ8 MPN CS-HYTE-X50G-SM

ATX mid-tower case with micro-mesh intake, louvered exhaust and 4 mm acoustic glass, supporting E-ATX boards and 360 mm GPU airflow

  • TypeATX Mid Tower
  • ColorPink
  • Case MaterialABS / Steel / Tempered Glass
  • Motherboard CompatibilityATX / E-ATX / ITX / Micro ATX
  • Side Panel1 x Side Tempered Glass Panel
  • Dust FiltersBottom

Option Glass (Pink)

Struck-through versions exist but are not stocked here.

  • Low-pressure micro-mesh intake for quieter thermals
  • Louvered blade exhaust cuts resistance and stiffens the frame
  • 4 mm laminated acoustic glass dampens system noise
  • Cold-floor layout feeds GPU with up to 360 mm of fresh air
  • Top-mounted PSU canopy simplifies cable routing with gravity

Modern airflow chassis

The HYTE X50 is an ATX mid-tower case built around a full-coverage micro mesh front panel that creates a low-pressure intake path. A patent-pending louvered blade vent on the rear reduces exhaust impedance while adding structural rigidity. The chassis supports ATX, E-ATX, Micro-ATX and ITX motherboards and is finished in a pink colourway with a 4 mm laminated acoustic glass side panel that dampens sound and resists shattering.

Check clearances and drive needs

Verify that your CPU cooler does not exceed 180 mm in height before ordering. The case ships without any pre-installed fans, so you must supply front, rear and side fans yourself; the mounts accept 120 mm units in a 3-1-3 layout. Only one 3.5-inch and two 2.5-inch internal drive bays are provided, so plan storage accordingly. Ensure your power supply fits the top-mounted canopy design for cable routing.

Glass and canopy change daily use

The 4 mm laminated acoustic glass panel noticeably reduces transmitted fan and pump noise compared with standard tempered glass. Its shatter-resistant bonding layer holds fragments together if an impact occurs. The structural PSU canopy at the top of the interior creates gravity-assisted cable channels and tie-down points, simplifying routing and keeping the main chamber tidy. Up to three 120 mm fans can be mounted on the side bracket to direct a 360 mm wide stream of fresh air straight onto the graphics card.

Highlights

  • Low-pressure micro-mesh intake for quieter thermals
  • Louvered blade exhaust cuts resistance and stiffens the frame
  • 4 mm laminated acoustic glass dampens system noise
  • Cold-floor layout feeds GPU with up to 360 mm of fresh air
  • Top-mounted PSU canopy simplifies cable routing with gravity

Specifications

BrandHYTE
ModelCS-HYTE-X50G-SM
TypeATX Mid Tower
ColorPink
Case MaterialABS / Steel / Tempered Glass
Motherboard CompatibilityATX / E-ATX / ITX / Micro ATX
Side Panel1 x Side Tempered Glass Panel
Dust FiltersBottom
Internal 3.5" Drive Bays1
Internal 2.5" Drive Bays2
Expansion Slots7
Fan OptionsFront - 3 x 120mm / Rear - 1 x 120mm / Side - 3 x 120mm
Pre-installed FansNo Fan Installed
Max CPU Cooler Height180 mm
Shipping weight6.15 kg
Package size597 × 589 × 340 mm

Other versions of this model

5 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

Does the HYTE X50 come with any fans or do I need to buy them separately?

The case ships with no fans installed. You will need to supply up to seven 120 mm fans for the front, rear and side mounts.

Which motherboard form factors does the X50 support so I can match my build?

The chassis accepts ATX, E-ATX, Micro-ATX and ITX boards, giving you a wide choice of platform sizes.

How tall a CPU cooler can I fit inside the X50?

The maximum cooler height is 180 mm, so most tower air coolers and all-in-one radiators will clear the side panel.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.