Intel DC S3610 SSDSC2BX016T401 1.6TB 2.5" SATA enterprise SSD
- 2.5"
- 1.6TB
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
Intel
A 3.84 TB 2.5" U.2 NVMe enterprise SSD delivering 6500 MB/s reads and 700,000 random read IOPS with 1 DWPD endurance and 256-bit AES encryption
The Intel D7-P5510 is a 3.84TB enterprise solid-state drive built for server deployments. It uses a 2.5-inch U.2 form factor with a PCIe 4.0 x4 NVMe interface. The drive employs 144-layer TLC 3D NAND and an Intel controller to deliver consistent performance for data centre workloads. It includes 256-bit AES hardware encryption for data security.
This drive fits servers that require sustained sequential reads up to 6500 MB/s and random reads up to 700,000 IOPS. Its 7168 TBW rating and 1 DWPD endurance support heavy daily write cycles. Buyers who need higher write IOPS than 170,000 or capacities beyond 3.84TB should evaluate other models. Systems without U.2 backplane support cannot install this drive.
The drive connects exclusively through a U.2 port that runs PCIe 4.0 x4 NVMe protocol. A server backplane or adapter must provide this exact electrical and mechanical interface. Read latency measures 82 µs and write latency 15 µs at 4KB. Active power draw stays under 18W within a 0°C to 70°C operating range.
| Brand | Intel |
|---|---|
| Series | D7-P5510 |
| Model | SSDPF2KX038TZ01 |
| Form Factor | 2.5" U.2 |
| Capacity | 3.84TB |
| Memory Components | 144L TLC 3D NAND |
| Interface | PCI-Express 4.0 x4 |
| Controller | Intel |
| Max Sequential Read | Up to 6500 MBps |
| Max Sequential Write | Up to 3400 MBps |
| 4KB Random Read | Up to 700,000 IOPS |
| 4KB Random Write | Up to 170,000 IOPS |
| Read Latency | 82 µs |
| Write Latency | 15 µs |
| Endurance | 1 DWPD |
| MTBF | 2,000,000 hours |
| Features | Endurance Rating: Up to 7.0PBW (JESD219 workload) Hardware Encryption: AES 256 bit |
| Power Consumption (Idle) | <5W |
| Power Consumption (Active) | <18W |
| Operating Temperature | 0°C ~ +70°C |
| Weight | 138g |
| Shipping weight | 4.08 kg |
| Package size | 823 × 823 × 823 mm |
The 3.84 TB model provides 7168 TB TBW and 1 DWPD endurance. Choose it when your workload needs that write budget; smaller capacities in the same series will have proportionally lower TBW.
It is the peak throughput over the PCIe 4.0 x4 link. Real-world speeds depend on queue depth, CPU overhead and thermal limits; sustained reads in typical server workloads will sit below this ceiling.
The U.2 connector carries four lanes of PCIe 4.0, capping bandwidth at the drive’s rated 6500 MB/s read and 3400 MB/s write. It also enables hot-plug in supported backplanes.
Also in this aisle
Same shelf, same checkout — eight coins and a 30-minute rate lock.
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
Pick the language the site speaks to you in.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?