We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Three white 120mm ARGB case fans with infinite mirror lighting on three sides

Jungle Leopard

Jungle Leopard Prism6 MAX 120mm ARGB Case Fan White 3-Pack

SKU CH-SCEF-BXQWN

Three-sided infinite-mirror ARGB lighting with hydraulic-bearing fans delivering 58.36 CFM at 1850 RPM and 29 dBA

  • Fan Counts1 Fan
  • TypeCase Fan
  • CompatibilityCase
  • Fan Size120mm
  • Fan Thickness25mm
  • Bearing TypeHydraulic Bearing

Color White Forward-3Pack

  • Three-sided infinite mirror ARGB lighting creates depth with 0.5mm layered geometry
  • Hydraulic bearing reduces wear and noise for longer service life
  • 9-blade design delivers 58.36CFM airflow at 2.07mmH2O pressure
  • PWM control spans 800 to 1850 RPM while keeping noise at 29DBA
  • Double-sided silicone pads cut resonance vibration when mounted in the chassis

Three-Sided Infinite Mirror ARGB

This 120 mm case fan uses left and right infinity mirrors spaced .5 mm apart around a central circular mirror to create a layered ARGB effect. The white finish suits builds that want bright, coordinated lighting. It is sold as a three-pack for uniform illumination across multiple mounts.

Hydraulic Bearing 800-1850 RPM Upgrade

The hydraulic bearing supports speeds from 800 to 1850 RPM while keeping noise at 29 dBA, replacing sleeve or basic ball-bearing fans that grow louder over time. The jump is worth it when you need 58.36 CFM airflow and 2.07 mmH2O pressure for radiator or mesh-front cases without audible whine.

5 V 3-Pin ARGB Header Requirement

The light signal uses a 5 V 3-pin connector separate from the 4-pin PWM power plug, so synchronization only works on motherboards that provide that header. Builders whose boards lack a 5 V 3-pin ARGB connection must add a separate controller box to unify lighting effects.

Highlights

  • Three-sided infinite mirror ARGB lighting creates depth with 0.5mm layered geometry
  • Hydraulic bearing reduces wear and noise for longer service life
  • 9-blade design delivers 58.36CFM airflow at 2.07mmH2O pressure
  • PWM control spans 800 to 1850 RPM while keeping noise at 29DBA
  • Double-sided silicone pads cut resonance vibration when mounted in the chassis

Specifications

BrandJungle Leopard
SeriesPrism6 MAX
ModelJL Prism6 MAX BK
Fan Counts1 Fan
TypeCase Fan
CompatibilityCase
Fan Size120mm
Fan Thickness25mm
Bearing TypeHydraulic Bearing
RPM1850RPM
Air Flow58.36CFM
Air Pressure2.07mmH20
Noise Level=29DBA
Power Connector3 / 4 Pin
ColorBlack / White
LEDARGB
Dimensions120×120×25mm 4.72*4.72*0.98in

Other versions of this model

5 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

Will the 120mm by 25mm frame fit my standard case fan mounts?

Yes, the 120mm square frame with 25mm thickness matches the standard mounting holes used on most PC cases.

How do I connect the 5V 3-pin ARGB and 4-pin PWM cables correctly?

Plug the 4-pin PWM connector into the motherboard fan header and the 5V 3-pin ARGB connector into a 5V 3-pin header; the fan will not light without the ARGB link.

When should I expect to replace the hydraulic bearing fan?

The hydraulic bearing is rated for long life, but plan to replace the fan if noise rises above the rated 29 dBA or airflow drops below 58.36 CFM.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.