We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Small green circuit board with a silver M12 lens module mounted at an angle, ribbon cable attached

KEHIPI

KEHIPI IMX462 2MP 141° M12 Camera Module

SKU CH-2N3N-FEYHS

A 2 MP IMX462 camera module for Raspberry Pi 5 with a 141° M12 lens, ultra-low-light sensitivity of 10471 G and strong near-infrared response

  • Ultra-low-light capture at near 0 lux with IMX462 sensor
  • High gravity sensitivity of 10471 G for superior night performance
  • Enhanced near-infrared sensitivity around 1× for surveillance and agriculture
  • Smooth video up to 90 fps at 1280×720 resolution
  • Wide 141° horizontal field of view via M12 lens

Raspberry Pi 5 Camera Module

This camera module is built for the Raspberry Pi 5 and uses the Sony IMX462 sensor to capture colour video in extremely low light. It suits makers, researchers and developers who need reliable imaging after dark without active illumination. The board connects directly to the Pi 5 camera connector and presents a standard V4L2 interface for existing software stacks.

141° M12 Wide-Angle Lens

The fixed M12 lens gives a horizontal field of view of 141°, covering a broad scene without mechanical adjustment. This focal length is chosen for surveillance, robotics and environmental monitoring where a single camera must watch a wide area. Builders who need a narrower angle or interchangeable optics should select a different module.

Sustained Frame-Rate Behaviour

At 1280×720 the sensor can run up to 90 fps, while 1920×1080 still capture reaches 46 fps and continuous Full HD video is rated at 30 fps. The Arducam Pivariety ISP maintains these rates over long captures without thermal throttling, so overnight time-lapse or all-day recording sessions keep the advertised frame cadence.

Highlights

  • Ultra-low-light capture at near 0 lux with IMX462 sensor
  • High gravity sensitivity of 10471 G for superior night performance
  • Enhanced near-infrared sensitivity around 1× for surveillance and agriculture
  • Smooth video up to 90 fps at 1280×720 resolution
  • Wide 141° horizontal field of view via M12 lens

Specifications

BrandArducam
Model2MP IMX462
Part NumberB0444

Questions about this item

What does 10471 G sensitivity mean when the IMX462 camera is running on a Raspberry Pi?

It indicates extremely high low-light response, allowing the sensor to capture usable colour and near-infrared detail in near-zero lux conditions where standard modules produce only noise.

How does the V4L2 interface limit frame rates on this 2 MP module?

V4L2 exposes the sensor's native modes: 90 fps at 1280×720, 46 fps at 1920×1080 in still mode, and 30 fps at 1920×1080 in video mode.

Will the M12 lens and 141° horizontal view fit inside a standard Raspberry Pi camera case?

The M12-mount lens protrudes further than the official Pi camera, so most stock cases need a cut-out or a taller lid to avoid vignetting.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.