KINGSMAN GAMING SK350 2.5" 512GB SATA internal SSD
- Internal Solid Stat…
- Consumer
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
KINGSMAN GAMING
A 2.5" SATA internal SSD with 512GB of 3D NAND storage delivering up to 560 MB/s reads and 530 MB/s writes for faster boot and load times
Options 512GB SK150
The KINGSMAN GAMING SK150 is a 2.5 inch internal solid-state drive with a 512GB capacity. It uses a SATA III interface and 3D NAND memory components. The drive is designed for consumer use as a primary boot device or a secondary storage upgrade.
The standard 2.5 inch form factor fits typical laptop bays and desktop drive cages. SATA data and power connectors are used, so installation requires available SATA ports and cables. With no moving parts, the SSD offers silent operation and greater shock resistance than mechanical hard drives.
Before ordering, verify that your system has an open 2.5 inch drive bay or a compatible mounting bracket. Confirm the motherboard provides a spare SATA III port and that a SATA power connector is available from the power supply. The drive is rated for 300TB written endurance and 1,000,000 hours MTBF.
| Brand | AITC KINGSMAN |
|---|---|
| Series | SK150 |
| Model | KSSK150S512250 |
| Device Type | Internal Solid State Drive (SSD) |
| Used For | Consumer |
| Form Factor | 2.5" |
| Capacity | 512GB |
| Memory Components | 3D NAND |
| Interface | SATA III |
| Protocol | SATA |
| Max Sequential Read | Up to 560 MBps |
| Max Sequential Write | Up to 500 MBps |
| Terabytes Written (TBW) | 300TB |
| MTBF | 1,000,000 hours |
Other versions of this model
Same family, different memory, cooler or clock — compare before you commit.
The SATA III link limits this drive to 560 MB/s sequential read and 530 MB/s sequential write, so it will not exceed those figures in practice.
It requires a standard 2.5 inch drive bay or bracket with the usual SATA data and power connectors, matching the 2.5 inch form factor.
Connect the SATA data cable to the motherboard and the SATA power cable from the PSU, then secure the drive; the step often missed is plugging in both cables before closing the case.
Also in this aisle
Same shelf, same checkout — eight coins and a 30-minute rate lock.
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
Pick the language the site speaks to you in.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?