Kingston Technology Corp. KF564C32RSAK2-32 Fury Renegade RGB 32GB (2 x 16GB) DDR5 6400 CL32
- 32GB (2 x 16GB)
- 288-Pin PC RAM
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
Kingston Technology Corp.
A 32 GB dual-channel DDR5 kit running at 6000 MT/s with CL30 latency and white heat spreaders
Capacity 32GB (2 x 16GB)
Speed DDR5 6000 (PC5 48000)
CAS Latency|Color|LED Color CL30|White
The Kingston FURY Beast kit contains two 16 GB DDR5 modules rated at 6000 MT/s with CL30 timings. A white heat spreader covers each 288-pin stick and the set runs at 1.40 V. Both Intel XMP 3.0 and AMD EXPO profiles are programmed on the modules.
This kit suits AMD Ryzen 600 series and Intel 600/700 series platforms that can enable the XMP 3.0 or EXPO 1.0 profile. Systems limited to 1.35 V JEDEC operation will not reach the rated speed without manual tuning. Buyers wanting RGB lighting or lower voltage should look elsewhere.
The memory is validated at 1.40 V to hit DDR5-6000 CL30. If your motherboard or CPU memory controller cannot supply that voltage the kit will fall back to a lower JEDEC speed. Check the board specifications for 1.40 V support before purchasing.
| Brand | Kingston |
|---|---|
| Series | FURY Beast |
| Model | KF560C30BWEK2-32 |
| Capacity | 32GB (2 x 16GB) |
| Type | 288-Pin PC RAM |
| Speed | DDR5 6000 (PC5 48000) |
| CAS Latency | CL30 |
| Timing | 30-36-36 |
| Voltage | 1.40V |
| Multi-channel Kit | Dual Channel Kit |
| BIOS/Performance Profile | Intel XMP 3.0 and AMD EXPO |
| Color | White |
| Heat Spreader | Yes |
| Features | Kingston FURY KF560C30BWEK2-32 is a kit of two 2G x 64-bit (16GB) DDR5-6000 CL36 SDRAM (Synchronous DRAM) 1Rx8, memory module, based on eight 2G x 8-bit FBGA components per module. Each module kit supports AMD® EXPO v1.0 and Intel® Extreme Memory Profiles (Intel® XMP) 3.0. Total kit capacity is 32GB. Each module has been tested to run at DDR5-6000 at a low latency timing of 36-38-38 at 1.35V |
| Recommend Use | AMD & Intel Compatible / AMD 500 Series / AMD 600 Series / AMD B550 / AMD B650 / AMD Ryzen Compatible / AMD X570 / AMD X670 / High Performance or Gaming Memory / Intel 500 Series / Intel 600 Series / Intel 700 Series / Intel B660 / Intel B670 / Intel Compatible / Intel Z590 / Intel Z690 / Intel Z790 |
| LED Color | None |
| Shipping weight | 0.09 kg |
| Package size | 171 × 95 × 15 mm |
Other versions of this model
Same family, different memory, cooler or clock — compare before you commit.
Yes, the kit supports AMD EXPO 1.0 and is validated for AMD 600 series chipsets including B650, so enabling EXPO in the BIOS will set the rated 6000 MT/s speed.
The modules run at 1.40 V for the XMP/EXPO profile; they also operate at 1.35 V with timings of 36-38-38, so standard airflow over the white heat spreaders is usually sufficient.
The kit is sold as a matched 2 x 16 GB pair for dual-channel operation; using a single module will halve bandwidth and the modules are not tested individually for standalone use.
Also in this aisle
Same shelf, same checkout — eight coins and a 30-minute rate lock.
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
Pick the language the site speaks to you in.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?