Kingston Technology Corp.
Kingston Technology ValueRAM 16GB DDR3 1600 ECC Reg CL11 1.35V Hynix A
16 GB DDR3 1600 ECC registered DIMM with CL11 latency and 1.35 V operation
- Capacity16GB
- SpeedDDR3 1600 (PC3 12800)
- CAS LatencyCL11
- 16 GB DDR3 1600 capacity for demanding workloads
- CL11 latency for responsive data access
- 35 V low-voltage operation reduces power draw
- ECC registered design protects data integrity
- 240-pin DIMM form factor fits standard server slots
16 GB DDR3 ECC registered module
This 16 GB DDR3 module runs at 1600 MHz with CL11 latency and 1.35 V operation. It uses a 240 pin registered DIMM layout with x4 DR organisation and on board thermal sensor. The kit is suited for servers or workstations that require error correcting memory.
Sustained load behaviour with ECC and thermal sensor
Error correcting code detects and corrects single bit errors during long compute runs, reducing silent data corruption. The registered buffer lightens electrical load on the memory controller when all slots are populated. An integrated thermal sensor allows platform firmware to throttle or increase airflow before temperatures exceed safe limits.
Compatibility checks before ordering
Verify that your motherboard accepts DDR3 registered ECC DIMMs and supports 1.35 V low voltage operation. Confirm the platform can address 16 GB per slot and that the memory controller works with x4 DR organisation. Ensure the BIOS is current enough to initialise the thermal sensor and registered buffer correctly.
Highlights
- 16 GB DDR3 1600 capacity for demanding workloads
- CL11 latency for responsive data access
- 35 V low-voltage operation reduces power draw
- ECC registered design protects data integrity
- 240-pin DIMM form factor fits standard server slots
Specifications
| Capacity | 16GB |
|---|---|
| Speed | DDR3 1600 (PC3 12800) |
| CAS Latency | CL11 |
Questions about this item
How much power does the 1.35 V DDR3 module draw when the system runs continuously?
The module operates at 1.35 V, which is the standard low-voltage level for DDR3, reducing heat output during all-day workloads compared to 1.5 V variants.
What motherboard slot and chipset features are required for this 240-pin registered ECC DIMM to function?
A DDR3 motherboard with a 240-pin DIMM slot that supports registered ECC memory and the x4 DR organisation is required for the module to be recognised.
Will this registered ECC DDR3 module work in a desktop board that currently uses unbuffered non-ECC DDR3 sticks?
No — registered ECC DIMMs cannot be mixed with unbuffered non-ECC modules; the board must support registered ECC operation for this stick to work.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
PrimoChill
PrimoChill Praxis Wetbench Open-Air Test Bench 461.8mm
- Open-Air
$274.89
0.00355238BTC
In stock
Silverstone Technology
SilverStone Technology Strider 1200W 80 Plus Platinum Modular Power Supply
- ATX Mid Tower
- 1200W
$324.03
0.00418741BTC
In stock