We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Compact 26-piece 3D printer nozzle cleaning kit with stainless steel pins, copper brushes, tweezers and L-wrenches in a storage tube

KuanStore K_1001 26-Piece 3D Printer Nozzle Maintenance Kit

SKU CH-0BQW-ZWM2B

A 26-piece nozzle maintenance kit with 20 stainless steel cleaning pins in five sizes, two copper wire brushes, two tweezers and two L-shaped wrenches for clearing clogs

  • TypeStainless Steel
  • Compatible SystemWindows, macOS, Linux
  • SpecificationStainless Steel, 5.6 L x 5.59 W x 0.75 H inches, 0.15 kilogr
  • Features3D printer nozzle cleaning, Stainless Steel, Personal Comput
  • Complete 26-piece kit covers every nozzle maintenance task
  • 20 stainless-steel cleaning pins in five sizes clear clogs precisely
  • Two copper wire brushes remove residue without scratching surfaces
  • Two L-shaped wrenches tighten and remove nozzles securely
  • Two tweezers handle small parts and surplus filament accurately

26-Piece Nozzle Maintenance Kit

This 26-piece kit equips 3D printer owners with a complete set of stainless steel tools for routine nozzle care. It contains 20 cleaning pins, two copper wire brushes, two tweezers and two L-shaped wrenches, all organised in a compact storage tube. The assortment suits hobbyists and professionals who want a single pack for clearing clogs and tightening hardware.

Five Pin Sizes Cover Common Nozzles

The 20 stainless steel pins come in five diameters: 0.15 mm, 0.25 mm, 0.35 mm, 0.4 mm and 0.5 mm. This range handles the most frequent nozzle bore sizes found on desktop FDM printers. Pins are rigid enough to push through hardened residue but will not clear severe carbonised blockages that require chemical soaking or ultrasonic cleaning.

Replaces Ad-Hoc Needle Sets

Builders who currently rely on loose acupuncture needles or single-size drill bits gain organised, size-labelled pins plus dedicated brushes and wrenches. The jump is worthwhile when nozzle changes and cold pulls become a regular part of the workflow. Users needing specialised large-bore or micro-nozzle tools beyond 0.5 mm will require separate purchases.

Highlights

  • Complete 26-piece kit covers every nozzle maintenance task
  • 20 stainless-steel cleaning pins in five sizes clear clogs precisely
  • Two copper wire brushes remove residue without scratching surfaces
  • Two L-shaped wrenches tighten and remove nozzles securely
  • Two tweezers handle small parts and surplus filament accurately

Specifications

BrandKuanStore
ModelK_1001
Part NumberK_1001
TypeStainless Steel
Compatible SystemWindows, macOS, Linux
SpecificationStainless Steel, 5.6 L x 5.59 W x 0.75 H inches, 0.15 kilograms, K_1001
Features3D printer nozzle cleaning, Stainless Steel, Personal Computer

Questions about this item

Will the 0.4 mm and 0.5 mm pins in this kit clear the nozzles on my older printer?

The kit includes twenty stainless-steel cleaning pins in five sizes — 0.15 mm, 0.25 mm, 0.35 mm, 0.4 mm and 0.5 mm — so you can match the pin to the nozzle diameter on most printers.

How do I know the cleaning pins are doing their job after I use them?

Heat the nozzle, push the correct-size pin through, then extrude filament; a steady, even flow without sputtering shows the blockage is cleared.

What exactly ships in the box and is anything else required?

The box contains twenty cleaning pins in a storage tube, two copper wire brushes, two tweezers (straight and curved) and two L-shaped wrenches — no extra tools are needed for basic nozzle maintenance.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.