We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Small rectangular development board with a 1.8 inch touch AMOLED screen showing vivid colours

LORDWORLD

LORDWORLD RP2350 1.8 inch Touch AMOLED Development Board

SKU CH-EGJV-SZQS1

A 1.8 inch AMOLED touch display board with 368×448 resolution and dual-core RP2350 for smart device development

  • 8 inch AMOLED touch screen enables compact interactive projects
  • 368 by 448 pixel resolution with 16.7 million colours delivers vivid visuals
  • 178 degree wide viewing angle keeps content clear from any side
  • RP2350 dual-core architecture offers Arm Cortex-M33 and RISC-V Hazard3 choices
  • SH8601 display driver plus FT3168 capacitive touch chip simplifies hardware integration

Compact development board for IoT prototypes

The LORDWORLD RP2350 board pairs a 1.8 inch AMOLED touch panel with a dual-core RP2350A microcontroller. Developers can switch between Arm Cortex-M33 and open-hardware Hazard3 cores to explore RISC-V in a stable environment. The 368 by 448 pixel display renders 16.7 million colours for vivid human-computer interaction demos. A built-in battery compartment enables untethered operation in smart-device projects.

Low-heat AMOLED panel with integrated drivers

The SH8601 display driver and FT3168 capacitive touch controller are embedded on the board, keeping the component count small and heat output minimal. AMOLED technology lights only active pixels, so power draw stays low during typical UI workloads. A 178 degree viewing angle maintains colour accuracy from almost any orientation. No active cooling is required for normal development use.

Rugged enclosure-ready design with battery slot

The compact PCB fits inside a small case and includes a dedicated footprint for an internal cell, letting builders ship finished prototypes without external packs. Touch input is handled by the FT3168 chip, providing responsive tap and swipe detection through the AMOLED surface. Standard RP2350 GPIO remains accessible for sensors, actuators or wireless modules. The board targets makers who need a self-contained touch interface rather than a headless sensor node.

Highlights

  • 8 inch AMOLED touch screen enables compact interactive projects
  • 368 by 448 pixel resolution with 16.7 million colours delivers vivid visuals
  • 178 degree wide viewing angle keeps content clear from any side
  • RP2350 dual-core architecture offers Arm Cortex-M33 and RISC-V Hazard3 choices
  • SH8601 display driver plus FT3168 capacitive touch chip simplifies hardware integration

Specifications

BrandLORDWORLD

Questions about this item

How do I install the FT3168 touch driver on the RP2350 board?

Connect the board via USB, select the BOOTSEL mode, then flash the MicroPython or C SDK firmware that includes the FT3168 driver; the step many miss is enabling the I2C pins for the touch controller in the board configuration file before compiling.

What maintenance will the 1.8 inch AMOLED display need over time?

The 16.7M colour AMOLED panel has no backlight to replace; keep the firmware updated to run pixel-shift routines that reduce burn-in, and clean the glass only with a dry microfibre cloth.

At what point does the RP2350 dual-core processor throttle during sustained load?

The RP2350A lacks an on-die thermal sensor, so the first limit is the 178° viewing-angle AMOLED driver SH8601 hitting its maximum junction temperature, which typically occurs before the Cortex-M33 or Hazard3 cores throttle.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.