LR-LINK
LR-LINK LREC9712HF-2SFP Dual Port SFP Gigabit Network Card
Dual-port SFP Gigabit Ethernet adapter using Intel I350, PCIe x4 for servers
- Speed1000Mbps
- Connectors2 x SFP
- InterfacePCI-Express
- Wake On LANYes
- Temperature0°C ~ 55°C
- Humidity5 % ~ 95 % (Non-condensing)
- Dual SFP ports give two independent Gigabit links
- PCIe 2.1 x4 interface fits x4, x8 and x16 slots
- Wake-on-LAN enables remote power-on of the server
- Broad OS support covers Windows, Linux, FreeBSD and VMware
- Operates reliably from 0 °C to 55 °C ambient temperature
Dual SFP Gigabit Server Adapter
This PCI Express x4 network card adds two 1 Gbps SFP ports to a server or workstation. It is built around the Intel I350 controller for reliable wired connectivity in multi-core environments. The bracket fits both low-profile and full-height chassis.
Suited for virtualised hosts needing extra fibre
It suits administrators expanding a virtualised host with additional Gigabit fibre uplinks. It is not for machines that only have PCI Express x1 slots available. It is not for deployments that require 10 Gbps or faster port speeds.
PCI Express 2.1 x4 electrical interface
The card runs on a PCI Express 2.1 x4 link at 5.0 GT/s and is compatible with x4, x8 and x16 slots. This single interface detail decides whether the adapter will negotiate full bandwidth in the target system.
Highlights
- Dual SFP ports give two independent Gigabit links
- PCIe 2.1 x4 interface fits x4, x8 and x16 slots
- Wake-on-LAN enables remote power-on of the server
- Broad OS support covers Windows, Linux, FreeBSD and VMware
- Operates reliably from 0 °C to 55 °C ambient temperature
Specifications
| Brand | LR-LINK |
|---|---|
| Model | LREC9712HF-2SFP |
| Speed | 1000Mbps |
| Connectors | 2 x SFP |
| Interface | PCI-Express |
| Wake On LAN | Yes |
| Temperature | 0°C ~ 55°C |
| Humidity | 5 % ~ 95 % (Non-condensing) |
| Class | 1000M, PCIE |
Questions about this item
Does my motherboard need a PCI Express x4 slot for this LREC9712HF-2SFP card?
The card uses a PCI Express v2.1 x4 interface and is compatible with x4, x8 and x16 slots, including Low Profile and Full Height brackets.
Will the Intel I350 based adapter work with my older Windows Server 2008 R2 installation?
Yes, the driver stack supports Windows Server 2008 R2 alongside Windows 7, 8, 8.1 and Server 2012 R2.
How can I verify both SFP ports are passing traffic after installation?
Check link LEDs on each port, confirm 1000 Mbps speed in the OS network panel, and run a ping or iperf test through each SFP transceiver.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
NVIDIA ConnectX-7 MCX75343AMS-NEAC 400GbE network card
- InfiniBand: NDR/NDR…
- Single-port OSFP In…



