Mean Well
Mean Well RD-85B 88W Dual Output 5V 24V Power Supply
An 88 W dual-output supply delivers 5 V at 8 A and 24 V at 2 A, rated for 70 °C operation with 105 °C capacitors and 300 VAC surge tolerance
- TypeAT
- Dual 5 V and 24 V rails deliver 88 W total power
- 8 A on 5 V and 2 A on 24 V for balanced loads
- Rated for 70 °C operating temperature with 105 °C capacitors
- Surge tolerance up to 300 VAC for 5 seconds
- Withstands 5 G vibration for harsh environments
Dual 5V and 24V rails
The Mean Well RD-85B is an enclosed AC-DC switching power supply that delivers two regulated outputs from a single unit. It suits industrial equipment, test benches and embedded projects that need both logic-level and higher-voltage rails simultaneously.
88 W total with 8 A on 5 V and 2 A on 24 V
The dual-output design reduces wiring and saves panel space compared with using separate supplies. It accepts a wide AC input and can tolerate a 300 VAC surge for five seconds, making it resilient in environments with unstable mains. The unit is rated for operation up to 70 °C and uses 105 °C electrolytic capacitors for extended service life.
Vibration rated to 5 G for harsh environments
The 88 W capacity comfortably runs typical control boards, sensors and small actuators on the 5 V rail while powering motors or relays on the 24 V rail. Headroom diminishes when both channels draw near their rated currents continuously, so loads that exceed 8 A on 5 V or 2 A on 24 V will require a larger supply.
Highlights
- Dual 5 V and 24 V rails deliver 88 W total power
- 8 A on 5 V and 2 A on 24 V for balanced loads
- Rated for 70 °C operating temperature with 105 °C capacitors
- Surge tolerance up to 300 VAC for 5 seconds
- Withstands 5 G vibration for harsh environments
Specifications
| Type | AT |
|---|
Questions about this item
What is the maximum operating temperature before the RD-85B shuts down or degrades?
The unit is rated for continuous operation up to 70 °C ambient temperature.
How loud does the RD-85B get and how much heat does it dump into a closed cabinet after hours of full-load use?
It uses passive cooling with 105 °C rated capacitors, so it runs silently but relies on external airflow to move the 88 W of waste heat.
Which cables or connectors must I already have to wire the RD-85B into my equipment?
You need to supply your own input power cord and output wiring to the screw terminals for the 5 V / 8 A and 24 V / 2 A rails.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Silverstone Decathlon R Gold 750W ATX 3.0 power supply
Silverstone Technology FA311-B FARA 311 Micro-ATX PC case
- Micro ATX



