MiTAC
MiTAC PD10AI Intel motherboard Celeron N3350 Thin Mini ITX Dual LAN No Audio
Thin Mini-ITX board with soldered Celeron N3350, dual Intel Gigabit LAN, triple independent displays via HDMI, DisplayPort and internal eDP or LVDS.
- CPU TypeCeleron Dual-Core
- Intel Celeron N3350 dual-core CPU for efficient low-power computing
- Triple independent display support via DisplayPort, HDMI and internal eDP or LVDS
- Dual Intel Gigabit Ethernet ports for reliable wired network redundancy
- Two M.2 slots plus PCIe 2.0 x1 expansion for flexible storage and add-in cards
- Thin Mini-ITX 6.7" x 6.7" form factor fits compact kiosk and all-in-one chassis
Thin Mini-ITX embedded board
The MiTAC PD10AI is a Thin Mini-ITX motherboard with an Intel Celeron N3350 dual-core processor soldered on. It targets system integrators building compact kiosks, digital signage players or all-in-one appliances where long-term availability matters.
Dual Intel Gigabit Ethernet
The board provides two Intel Gigabit Ethernet ports as its primary I/O expansion. This dual-LAN design lets the system sit on separate management and data networks without adding a discrete network card.
Triple display outputs and M.2 slots
Video reaches three independent screens through DisplayPort, HDMI and an internal eDP or LVDS header. Two M.2 sockets and a PCIe 2.0 x1 slot handle storage and add-in cards, while the lack of audio ports keeps the I/O panel focused on networking and video.
Highlights
- Intel Celeron N3350 dual-core CPU for efficient low-power computing
- Triple independent display support via DisplayPort, HDMI and internal eDP or LVDS
- Dual Intel Gigabit Ethernet ports for reliable wired network redundancy
- Two M.2 slots plus PCIe 2.0 x1 expansion for flexible storage and add-in cards
- Thin Mini-ITX 6.7" x 6.7" form factor fits compact kiosk and all-in-one chassis
Specifications
| CPU Type | Celeron Dual-Core |
|---|
Questions about this item
What does the Celeron N3350 dual-core processor deliver once installed in a system?
The N3350 provides two cores for everyday workloads and integrated graphics that drive up to three independent displays through the board's video outputs.
What expansion does the PCI-E 2.0 x1 interface actually allow?
The single PCI-E 2.0 x1 lane supports one add-in card such as a capture, I/O or networking adapter.
What clearance and mounting pattern does the Thin Mini-ITX 6.7" x 6.7" form factor require?
It fits standard Mini-ITX screw holes and needs a chassis with the reduced height clearance that defines the Thin Mini-ITX profile.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
PrimoChill Praxis Wetbench Open-Air Test Bench 461.8mm
- Open-Air
SilverStone Technology Strider 1200W 80 Plus Platinum Modular Power Supply
- ATX Mid Tower
- 1200W



