We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black dual-tower CPU air cooler with six heat pipes and 28 mm ARGB fans

Montech

Montech NX600 ARGB Black CPU cooler

SKU CH-QEA2-HGGZY MPN NX600 ARGB Black

Dual-tower air cooler with six heat pipes, two 28 mm ARGB fans at 2000 RPM and 85 CFM airflow for Intel LGA115X, 1200, 1700, 1851 and AMD AM4, AM5 sockets

  • ColorBlack
  • TypeFan & Heatsinks
  • Fan Size28mm
  • CPU Socket CompatibilityIntel LGA115X / 1200 / 1700 / 1851 and AMD AM4 / AM5
  • RPM2000 RPM
  • Air Flow85 CFM
  • Dual-tower design with six heat pipes delivers maximum cooling surface
  • Soldered copper base on six heat pipes minimises thermal resistance
  • Two 28 mm ARGB fans push 85 CFM at 2000 RPM
  • 17 dBA noise level keeps heavy-load operation quiet
  • Supports Intel LGA115X, 1200, 1700, 1851 and AMD AM4, AM5 sockets

Dual-Tower Air Cooler for High-Load CPUs

The Montech NX600 ARGB Black is a dual-tower CPU air cooler built with six heat pipes and two 28 mm ARGB fans. It targets builders who need sustained thermal headroom for extended gaming or heavy workloads on Intel LGA115X, LGA1200, LGA1700, LGA1851 and AMD AM4, AM5 platforms. The copper base is soldered directly to the pipes for even heat spread across both fin stacks.

Replacing Stock or Single-Tower Coolers

This unit steps up from basic box coolers or single-tower designs when noise and temperature margins become limiting factors. The dual 2000 RPM fans deliver 85 CFM at 34.17 dBA, while the 52 × 2 fin array increases dissipation surface. The jump is worth it when your current cooler throttles under load or runs loud enough to distract.

Check Clearance, Power and Mounting First

Verify that your case accommodates a 3.17 lb dual-tower cooler and that the 28 mm fan thickness clears memory modules and side panels. Confirm a 4-pin PWM header and a 5 V ARGB header are available on the motherboard for fan control and lighting sync. Ensure the supplied mounting kit matches your specific socket from the supported list.

Highlights

  • Dual-tower design with six heat pipes delivers maximum cooling surface
  • Soldered copper base on six heat pipes minimises thermal resistance
  • Two 28 mm ARGB fans push 85 CFM at 2000 RPM
  • 17 dBA noise level keeps heavy-load operation quiet
  • Supports Intel LGA115X, 1200, 1700, 1851 and AMD AM4, AM5 sockets

Specifications

BrandMontech
ModelNX600
Part NumberNX600 ARGB Black
ColorBlack
TypeFan & Heatsinks
Fan Size28mm
CPU Socket CompatibilityIntel LGA115X / 1200 / 1700 / 1851 and AMD AM4 / AM5
RPM2000 RPM
Air Flow85 CFM
Noise Level34.17dBA
Power Connector4 Pin
LEDARGB
Heatsink MaterialCopper
Weight3.17 lb
Shipping weight1.36 kg
Package size203 × 203 × 146 mm

Questions about this item

What case clearance is needed for the 28 mm thick dual-tower cooler?

The cooler weighs 3.17 lb and uses a 28 mm thick fan on each tower; check that your chassis specifies enough CPU-cooler height and side-panel clearance for a dual-tower design of this weight.

Which mounting brackets are used for the Intel LGA1700 and AMD AM5 sockets?

The package includes brackets for Intel LGA115X, 1200, 1700, 1851 and AMD AM4, AM5; install the correct back-plate and standoffs for your socket before placing the cooler on the CPU.

How often should the Hydro Dynamic Bearing fans be cleaned to maintain the 85 CFM airflow?

Dust the fin stacks and the two E28 ARGB fans every 6–12 months with compressed air; the Hydro Dynamic Bearings are sealed and do not require lubrication.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.