Mushkin Enhanced 996643 4GB (2x2GB) DDR3 1066 laptop RAM
- 4GB (2 x 2GB)
- 204-Pin DDR3 SO-DIMM
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
Mushkin Enhanced
A 128 MB DDR3 1333 dual-channel kit with CL9 timing and 1.50 V operation for laptop memory upgrades
Capacity 128MB
Speed DDR3 1333 (PC3 10666)
This Mushkin Enhanced 996647 kit supplies 128MB of DDR3 laptop memory in a dual-channel pair. Each 204-pin SO-DIMM runs at 1333 MHz with CL9 timing at 1.50V. The unbuffered, non-ECC modules are programmed for maximum compatibility with existing memory. Builders upgrading an older notebook that still uses DDR3 SO-DIMM slots can use this kit to fill two channels.
The two modules install side-by-side in the laptop's 204-pin SO-DIMM sockets to enable dual-channel operation. No heat spreader is fitted, so the modules sit flush in tight chassis spaces. The kit requires a platform that accepts DDR3 1333 (PC3 10666) at 1.50V and supports unbuffered, non-ECC memory. It frees the system from single-channel bandwidth limits when both slots are populated.
Operating at the standard 1.50V, the modules draw only the power the DDR3 specification defines for this speed. With no heat spreader or active cooling, they run silently and add negligible thermal load to the laptop's existing cooling solution. The low 128MB capacity per module keeps individual chip density modest, contributing to stable operation under normal workloads.
| Brand | Mushkin Enhanced |
|---|---|
| Model | 996647 |
| Capacity | 128MB |
| Type | 204-Pin DDR3 SO-DIMM |
| Speed | DDR3 1333 (PC3 10666) |
| CAS Latency | CL9 |
| Timing | 9-9-9-24 |
| Voltage | 1.50V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Multi-channel Kit | Dual Channel Kit |
| Heat Spreader | No |
| Features | Compatible Timings This product is programmed to use timings that offer maximum compatibility with your system and original memory. Dual Channel Kit Engineered for dual-channel architecture. Compatible Frequency This product is engineered to operate at the optimum frequency for compatibility with your system. |
| Shipping weight | 0.16 kg |
| Package size | 104 × 71 × 15 mm |
Other versions of this model
Same family, different memory, cooler or clock — compare before you commit.
At 128MB total across the dual-channel kit, the capacity is the first bottleneck you will hit once multiple applications or browser tabs are open for any length of time.
The modules have no heat spreader and operate at the standard 1.50V DDR3 voltage, so they add minimal heat and make no audible noise during continuous operation.
Your laptop needs two free 204-pin DDR3 SO-DIMM slots and a memory controller that supports DDR3 1333 (PC3 10666) at CL9 9-9-9-24 timings.
Also in this aisle
Same shelf, same checkout — eight coins and a 30-minute rate lock.
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
Pick the language the site speaks to you in.
No language matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?