Intel DC S3610 SSDSC2BX016T401 1.6TB 2.5" SATA enterprise SSD
- 2.5"
- 1.6TB
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
Mushkin Enhanced
A 250 GB M.2 2280 SATA internal SSD with MLC NAND, up to 550 MBps read, 530 MBps write and 86,000 IOPS random read
The Mushkin Enhanced Atlas Vital is an M.2 2280 internal solid-state drive built for consumer PCs and laptops that accept SATA-based M.2 modules. It provides 250GB of storage using MLC NAND flash and a SandForce controller. The drive fits any M.2 2280 slot wired for SATA signalling.
The drive connects through a SATA 3.0 (6Gb/s) interface and is backwards-compatible with SATA 3Gb/s ports. Sequential reads reach up to 550 MBps and writes up to 530 MBps, while 4KB random reads hit up to 86,000 IOPS. These figures represent the practical ceiling of the SATA III bus.
High-reliability MLC NAND is paired with built-in BCH ECC capable of correcting up to 55 bits per 512 byte sector. An integrated thermal sensor monitors drive temperature across an operating range of 0°C to +70°C. TRIM and SMART support maintain performance and health reporting, and firmware is user-upgradeable. The 3.50mm height, 22mm width and 80mm depth conform to the standard M.2 2280 footprint.
| Brand | Mushkin Enhanced |
|---|---|
| Series | Atlas Vital |
| Model | MKNSSDAV250GB-D8 |
| Device Type | Internal Solid State Drive (SSD) |
| Used For | Consumer |
| Form Factor | M.2 2280 |
| Capacity | 250GB |
| Memory Components | MLC |
| Interface | SATA III |
| Controller | SandForce |
| Max Sequential Read | Up to 550 MBps |
| Max Sequential Write | Up to 530 MBps |
| 4KB Random Read | Up to 86,000 IOPS |
| MTBF | >1,500,000 hours |
| Features | M.2 2280 form factor SATA 3.0 (6Gb/s) interface; backwards-compatible with SATA 3Gb/s High-reliability MLC NAND flash Built-in BCH ECC (Up to 55 bits correctable per 512 byte sector) TRIM support SMART support Integrated Thermal sensor User-upgradeable firmware |
| Operating Temperature | 0°C ~ +70°C |
| Storage Temperature | -40°C ~ +85°C |
| Height | 3.50mm |
| Width | 22mm |
| Depth | 80mm |
| Weight | 1 |
Yes, the drive uses the M.2 2280 form factor with a SATA III interface and is backwards-compatible with SATA 3.0 Gb/s slots, so it will work in any M.2 slot wired for SATA.
The drive uses high-reliability MLC NAND flash with built-in BCH ECC correcting up to 55 bits per 512 byte sector and an MTBF of 1,500,000 hours for long-term durability.
It is rated for 0 °C to 70 °C operating temperature and -40 °C to 85 °C storage temperature, with an integrated thermal sensor for monitoring heat.
Also in this aisle
Same shelf, same checkout — eight coins and a 30-minute rate lock.
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
Pick the language the site speaks to you in.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?