We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Rectangular black metal ATX power supply with two fans on one side

myVolts

myVolts 2000W ATX Dual Fan Miner Power Supply 8 GPU 12V 150A

SKU CH-FNBG-TKDDT

A 2000W ATX power supply with dual fans, 12V 150A output and eight GPU connectors for mining rigs

  • TypeAT
  • Stable 12V 150A output powers 8 graphics cards
  • Dual fans and EMI filtering keep temperatures low and ripple minimal
  • Up to 90% efficiency at typical loads cuts wasted energy
  • Multiple protections guard against voltage spikes, over-power and shorts
  • ATX12V 2.31 compliance ensures broad motherboard compatibility

2000W Miner ATX PSU

This myVolts unit is a non-modular ATX power supply rated at 2000 watts with a 12 volt rail capable of 150 amps. It uses dual fans for cooling and carries an 80 PLUS Gold certification with up to 90 percent efficiency under typical loads. The design includes active PFC and EMI filtering for low ripple output.

Mining rigs on 180 to 260 volt mains

Builders running eight graphics cards on a 180 to 260 volt AC supply will find the eight PCIe connectors and five SATA ports suited to dense GPU deployments. Systems operating on lower mains voltages cannot use this unit safely. The non-modular cable set also makes it a poor fit for compact cases where cable routing space is limited.

180 to 260 volt input window

The power supply only operates correctly when the mains voltage stays between 180 and 260 volts AC. If the local supply falls outside this range the unit will not deliver its rated output and may not start at all. Verifying the site voltage before purchase is the single step that determines whether this PSU can be used.

Highlights

  • Stable 12V 150A output powers 8 graphics cards
  • Dual fans and EMI filtering keep temperatures low and ripple minimal
  • Up to 90% efficiency at typical loads cuts wasted energy
  • Multiple protections guard against voltage spikes, over-power and shorts
  • ATX12V 2.31 compliance ensures broad motherboard compatibility

Specifications

TypeAT

Questions about this item

What motherboard power connector does the 2000W ATX unit require to power on?

The supply uses a 20+4 pin ATX connector that plugs directly into the motherboard main power socket.

Will the 12V 150A output run older PCIe cards that only have 6-pin power inputs?

The unit provides eight 8-pin 12V connectors; you would need 6-pin adapters for cards that lack 8-pin sockets.

How can I confirm the PSU is delivering stable 12V power after installation?

Measure the 12V rail with a multimeter under load; it should stay close to 12V with low ripple, and the dual fans should spin continuously.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.