myVolts
myVolts 320W TFX Power Supply for HP Pavilion s5610 s5611 s5613
TFX 320W power supply for HP Pavilion Slimline s5610, s5611 and s5613 models
- TypeAT
- Powers HP Pavilion Slimline models with 320 W steady output
- Replaces 200, 250, 300 or 350 W units in s5610 s5611 s5613
- Fits slimline and SFF cases using TFX form factor
- Connects motherboard, CPU, drives and legacy devices with 20+4 pin, 4-pin, Molex, floppy and SATA
- Runs on 100/240 V input with 80 mm cooling fan
TFX power supply for HP Pavilion Slimline
This 320W TFX unit replaces the original power supply in HP Pavilion Slimline s5610 s5611 s5613 desktops. It delivers 320 watts of continuous power for systems that previously used 200, 250, 300 or 350 watt units. The supply accepts 100 to 240 volt input for worldwide use. It is built as a direct replacement for slimline and small form factor chassis.
AT-type connectors and 80mm cooling
The supply uses an AT form factor with a 20+4 pin motherboard connector, a 4-pin CPU connector, two Molex connectors, a floppy connector and two SATA connectors. An 80mm fan handles cooling inside the compact TFX housing. The connector mix covers legacy drives and modern SATA storage in a single loom. Builders must verify that the chassis accepts TFX dimensions before installation.
SATA connectors add modern drive support
Two SATA power connectors let you run current solid-state or hard drives without adapters. The floppy and Molex connectors keep older peripherals working in the same build. No software or drivers are bundled with this power supply. The upgrade path tops out at 420 watts for future headroom.
Highlights
- Powers HP Pavilion Slimline models with 320 W steady output
- Replaces 200, 250, 300 or 350 W units in s5610 s5611 s5613
- Fits slimline and SFF cases using TFX form factor
- Connects motherboard, CPU, drives and legacy devices with 20+4 pin, 4-pin, Molex, floppy and SATA
- Runs on 100/240 V input with 80 mm cooling fan
Specifications
| Type | AT |
|---|
Questions about this item
What standard does the 20+4 pin connector on this TFX 320 W supply follow?
The unit uses an AT-type 20+4 pin motherboard connector, a 4-pin CPU connector, two Molex, a floppy connector and two SATA connectors.
What clearance does this TFX 320 W unit need inside an HP Pavilion Slimline s5610 s5611 s5613?
It is built to the TFX form factor for Slimline and SFF chassis, weighing 3 lb with an 80 mm cooling fan.
Which cables must be connected during installation to avoid a no-post condition?
Attach the 20+4 pin motherboard plug, the 4-pin CPU plug, then add SATA or Molex leads for drives; the floppy lead is optional.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
PNY Technologies, Inc. VCNRTX4000ADALP-PB RTX 4000 Ada 20GB GDDR6 workstation graphics card
- PCI Express 4.0 x16
- NVIDIA



