We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black modular ATX power supply with red 14cm fan

myVolts

myVolts ATX-600W 600W modular power supply 14cm red fan black

SKU CH-KP9F-SB7G5 MPN ATX-600W

A 600W modular ATX power supply with a 14cm red fan, automatic thermal speed control and manual 115/230V switching

  • TypeAT
  • Clearly labelled connectors speed up installation
  • 600 W output with over 80 % efficiency powers a basic desktop reliably
  • 14 cm fan adjusts speed automatically via thermal sensor
  • Modular cables reduce clutter and improve airflow inside the case
  • Manual 115/230 V switch offers flexibility for different mains supplies

600W modular ATX power supply

The myVolts ATX-600W delivers 600W of rated power for low-consumption desktop builds. It follows the Intel ATX12V 2.31 design with a double magnetic ring and > 80% efficiency. A 14cm fan runs under automatic thermal control for quiet operation. Modular cables carry clear connector markings to speed up installation.

Manual voltage switch and fixed cable set

The unit requires a manual 115/230V selector on the rear before powering on. Hold-up time is rated above 10 ms at full load. Fixed cables include a 20+4 pin motherboard connector, a 4+4 pin CPU connector, six SATA plugs, two 6+2 pin PCIe connectors and three fan headers. The 1.1 m mains lead is also fixed.

Check connector count and case depth

Verify that your motherboard uses a 20+4 pin main connector and a 4+4 pin CPU connector. Ensure the chassis can accommodate a 150 mm deep unit with an 86 mm height. Confirm the six SATA and two 6+2 pin PCIe connectors cover every drive and graphics card you plan to install.

Highlights

  • Clearly labelled connectors speed up installation
  • 600 W output with over 80 % efficiency powers a basic desktop reliably
  • 14 cm fan adjusts speed automatically via thermal sensor
  • Modular cables reduce clutter and improve airflow inside the case
  • Manual 115/230 V switch offers flexibility for different mains supplies

Specifications

TypeAT

Questions about this item

Should I pick the 600W unit or a lower-wattage model for a basic desktop?

The 600W rating suits a low-energy desktop and leaves headroom for a mid-range graphics card; a lower-wattage unit is only sensible if the build has no discrete GPU and minimal drives.

What does the >80% efficiency figure mean when the supply is running in my PC?

At typical loads the unit converts more than 80% of AC input into usable DC power, so less energy becomes heat and the fan can run slower and quieter.

The box says ATX12V 2.31 — what does that standard cap in practice?

The 2.31 spec defines the 24-pin motherboard connector, the 4+4-pin CPU connector and the voltage tolerances the supply must meet, ensuring compatibility with current mainstream platforms.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.